Fractal Design Define R2 ATX Tower Case

Cases|Damping
Viewing page 2 of 8 pages. Previous 1 2 3 4 5 6 7 8 Next

THE EXTERIOR

The Define R2 measures 207 x 440 x 521 mm (H x W x D) or 17.3" x 8.2" x 20.6", and weighs in at 12.5 kg or 27.5 lb.


The front bezel is guarded by a sturdy door secured by a pair of round magnets so it always closes tightly.


The door opens to reveal only a pair of exposed 5.25" bays (one with a 3.5" adapter) and two fan vents closely resembling those on the P180. The inside of the door is dampened with foam and the front 120 mm fan placements are filtered.


The rear of the case features a single 120/140 mm fan placement and four grommeted holes for tubing/cabling.


The front ports, which include line-out, mic, eSATA and a pair of USB connectors, are located at the top of the case near the front. Their are two 120/140 mm fan placements at the top, but they are sealed off by default.


Another 120/140 mm fan can be added to the bottom of the case at the center. Behind it resides a power supply vent with a removable filter. Above it you'll notice one of the case feet sitting on the side panel — it was damaged during shipping.


Previous 1 2 3 4 5 6 7 8 Next

Cases|Damping - Article Index
Help support this site, buy from one of our affiliate retailers!
Search: