Titan Fenrir & Coolermaster Hyper 212 Plus: Direct Touch Revisited

Cooling
Viewing page 3 of 10 pages. Previous 1 2 3 4 5 6 7 8 9 10 Next

TITAN FENRIR: PHYSICAL DETAILS

The Fenrir features 4 direct touch/contact heatpipes and 50 anodized aluminum fins in total. It measures 124 x 107 x 156 mm (W x D x H) and weighs about 610 grams, 740 grams with the stock fan and wire clips attached.


The heatpipes are big, 8 mm thick and form a simple "U"-shape with two straight rows at the ends.


On average, the fins are about 0.36 mm thick and spaced 1.78 mm apart.


From the top you can see the Fenrir is a fairly thick cooler.


The four heatpipes are separated by the base plate for structural reasons. Most copper heatpipes are not that strong/thick and thus require reinforcement.


The two heatpipes at the center of our sample were already tarnished when we removed the protective plastic sheet. The base was flat but there were some semicircular marks left over from the milling process.



Previous 1 2 3 4 5 6 7 8 9 10 Next

Cooling - Article Index
Help support this site, buy from one of our affiliate retailers!
Search: