Titan Fenrir & Coolermaster Hyper 212 Plus: Direct Touch Revisited

Viewing page 5 of 10 pages. Previous 1 2 3 4 5 6 7 8 9 10 Next


The Hyper 212 Plus features 4 direct touch/contact heatpipes and 57 aluminum fins in total. It measures 120 x 79.7 x 159.5 mm (W x D x H) and weighs about 470 grams, 640 grams with the stock fan and plastic brackets attached.

On average, the Hyper 212 Plus' fins are 0.43 mm thick and spaced 1.54 mm apart, very densely packed compared to most heatsinks. The heatpipes are staggered to dissipate heat more effectively and to catch more airflow.

The body is thin, only about 5 cm deep without the fan.

There are two deep grooves running down the face of the body on each side, though we're not sure exactly why. For the most part, the structure is a simple rectangular box.

The base is flat with some light machine marks.

Two plastic brackets screwed to each side of the fan are used to mount it to the heatsink. Small rubber pads are placed over the screws to dampen the fan.

Previous 1 2 3 4 5 6 7 8 9 10 Next

Cooling - Article Index
Help support this site, buy from one of our affiliate retailers!