Logic Supply SolidLogic Montivina Fanless Mini-ITX System

Complete|Mobile Systems
Viewing page 2 of 5 pages. Previous 1 2 3 4 5 Next

PHYSICAL DETAILS

The GS-L10 measures 225 x 195 x 80 mm or 8.9 x 7.7 x 3.2" (L x W x H) and weighs about 3.15 kg or 6.9 lb. The volume amounts to 3.5 liters, which is smaller than the 5.4 liters of the small Lenovo M90p and M58p office PCs, but substantially bigger than the 1~2 liter mini-PCs such as the Zotac ZBOX, Asus EeeBox or Lenovo Q110. None of these are fanless, though some are pretty quiet.


The system has standard video outputs (HDMI, DVI and VGA) but only 4 USB ports. Oddly there are dual RJ45 and COM connectors as well. The power button is located just below the AC power jack.


The top panel of the case comes off with the removal of four long bolts, though some force is required to overcome the thermal compound joining the ceiling heatpipe to a raised platform above the processor.


The heatpipe on the top panel is bolted down tightly. The ceiling is also home to the hard drive, in our case, a 16GB SSD from Emphase Industrial, a division of Logic Supply.


Inside is a Jetway mini-ITX GM45 chipset motherboard.


The cooling system centers on the CPU with multiple heatpipes emanating from the processor cooling block. There is also a separate passive chipset heatsink.


Heatpipes clamped onto the left side.



Previous 1 2 3 4 5 Next

Complete|Mobile Systems - Article Index
Help support this site, buy from one of our affiliate retailers!
Search: