Fractal Design Node 605 HTPC Style Case

Viewing page 2 of 6 pages. Previous 1 2 3 4 5 6 Next


The Node 605 is a black steel enclosure with an aluminum front panel, measuring 44.5 x 16.4 x 34.9 cm or 17.5 x 6.5 x 13.7 inches (W x H x D) for a total volume of 25.5 liters, substantially less than most microATX towers.

The door at the bottom opens up to reveal a slim optical drive bay, headphone and mic jacks, FireWire and USB 3.0 ports, and a card reader with micro/standard SD and Compact Flash support.

A lip has been dug out on both sides to more conveniently access the door. On the right side there's also a three speed switch for the fan controller which can be run at 5V, 7V, and 12V.

The case is equipped with three 120 mm fan mounts, two on the right side and one of the left, with one fan on each side provided gratis. Additional placements are available at the rear above the I/O panel but they are smaller (80 mm) and unfiltered.

The feet at the front of the case are broad while those at the back are stubby and arranged asymmetrically.

The top panel is affixed tightly, remvovable via two screws at the back. The interior is mostly featureless except for the hard drive trays which hang down, secured to the edge of the case on one side and to a support beam running along the center.

The cover is a solid 1.0 ~ 1.1 mm and lined with a 2 mm sheet of stiff, dimpled dampening material.

Previous 1 2 3 4 5 6 Next

Cases|Damping - Article Index
Help support this site, buy from one of our affiliate retailers!