NoFan CR-95C Copper Fanless CPU Cooler

Viewing page 2 of 6 pages. Previous 1 2 3 4 5 6 Next


The NoFan CR-95C Copper is composed of a copper base, four 6 mm thick copper heatpipes, a series of rounded copper wires (158 by our count), and some structural materials near the base which we believe is constructed of aluminum. According to our measurements, its dimensions are 18.3 x 18.3 x 14.7 cm (L x W x H) and it weighs 810 grams, significantly more than its specified 730 grams.

On its side, the CR-95C Copper resembles a high class hamster wheel. As the interior is completely hollow, it's lighter than it looks despite its mainly copper construction. The wires that form the heatsink's "fins" are looped to the heatppipes at the bottom.

Each wire is 1.67 thick and spaced 1.61 mm apart. They remind us thick metal coat hangers. They're held together at the top by a grey plastic hoop, an eyesore what otherwise is an mpressively shiny piece of bling.

At the bottom, the plate above the base extends outward and forms a ring at the edge to support the heatpipes and the weight of the frame.

The heatpipes are split into teams of two, with each set spreading out and covering half of the frame in a semicircle. Solder fuses the base, the pipes, and the baseplate above together.

The base surface is one of the finest we've seen. It's very flat and has been polished to a brilliant mirror shine.

Previous 1 2 3 4 5 6 Next

Cooling - Article Index
Help support this site, buy from one of our affiliate retailers!