Viewing page 1 of 2 pages. 1 2 Next
September 29, 2002 -- by Mike Chin
I spotted a cheap and cheerful plastic celebration of modern life in a large bin at an IKEA store. The label on the bin read: Breadbox $6.50. As I checked its dimensions with one of the paper measuring tapes IKEA offers customers who don't bring their own, a teenager ran up, grabbed a breadbox, and yelled to his friends nearby, "Hey, lookit my new iMac! Hahahahahaha!" That was good enough for me. I bought one. The picture above shows the end result some 10 days later. It's a complete PC in a breadbox.
The Breadbox PC began with a search for a mini-ITX case at local shops here in Vancouver, BC, Canada, where the latest in high tech is available - as long as it is smack dab in the middle of the mainstream. Mini-ITX cases apparently are not. A Mini-ITX case simply could not be found, and the Taiwanese case makers who promised samples all the way back in the spring seemed to have forgotten about their promises. The closest miss was local distributor, Elco Systems, who is said to represent Casetronics and G-Atlantic, both mini-ITX case makers. When contacted, the salesperson at Elco Systems mentioned special orders, multi-week delivery and not even an idea of price. This was the final straw. I decided it would be easier and faster to make my own.
The details of mini-ITX are known well enough by now. For the record, here's a synopsis:
The VIA EPIA 5000 used in this project is the same one reviewed by SPCR in the spring. It measures 6.5 inches (17 cm) square and weighs barely a pound, yet has an embedded VIA CPU running at 533 MHz and a host of integrated functions based around the VIA Apollo PLE133 chipset and VIA VT8231 southbridge: integrated video, audio, ATA 66/100, ethernet controller, multi I/O, TV-OUT (S-VIDEO), SPDIF audio/phono video -- composite or SPDIF. In a word, it is almost a complete PC on a board. Just add RAM, storage and power. It's not a gaming platform or engineering/graphics workstation, but for general office work, basic multimedia, e-mail and web surfing, it's perfectly good.
Naturally, the system had to be quiet.
|VIA EPIA 5000 Mini-ITX motherboard
||As described above, no fan on CPU heatsink
|256 meg PC133 SDRAM
|Seagate Barracuda IV 20G hard drive
||Still the quietest drive around
$60 current value
|Creative 12X CD-RW
||Older fairly quiet optical drive
|Seasonic SS-200SFD SFX (Flex-ATX) PSU
||Very quiet with S2FC fan circuit (4.3V default to fan); the fan in this sample, despite being the same 0.25A-rated Adda used in the SS300, is particularly quiet. It does not speed up at all in this application, as total power draw is extremely low.
|IKEA plastic breadbox (13.5" x 6" x 10")
|Small momentary contact switch
||For PC power
||To show when the PC is on
*All prices in US dollars.
IKEA plastic breadbox
It's made of a softish, somewhat translucent plastic about 3/32" thick, and is composed of three pieces: top, bottom and a hinged curved door. Four small hooking clasps in the corners, formed of the same material as the rest of the box, hold the top and bottom together, which more or less lock the hinge pins of the door in place. I took the breadbox apart to mount the components. Three main tools were used to cut necessary openings in the breadbox: a utility knife, a jig saw, and an electric drill.
Suspension Drive Bay
The motherboard could be mounted directly on the bottom of the box using screws and nuts, but drive bays had to be created for the hard drive and CD-RW drive. I wanted some way to suspend the drives to minimize mechanical coupling, which generally causes more noise than direct-to-air from a hard drive. Here's what I did: a plastic parts bin, cut up as shown below. It is shown upside down.
Two loops of elastic material and 2 short lengths of bamboo were used to suspend the drive, which makes no contact with the frame at all, except via the elastic, which is stretched taut to ensure security. This is shown below The bamboo pieces fit into notches cut into the plastic frame and are held in place by the tension of the elastic. A piece of 3/8" medite board is hot glued in to provide greater structural stability. It also allows the drive assembly to be secured with screws driven in from beneath the bottom of the breadbox.
Here it is with the CD-RW mounted on top. A thin piece of damping foam goes between the CD-RW and the drive bay. It is also glued with silicon sealer / glue and two elastic loops provide further security. Also seen to the right is an LED PCB power indicator pulled from an old discarded case. It was later hot-glued (with a hot glue gun) to the inside of the front panel. When it is on, the LED is clearly visible through the translucent case.
Seasonic SS-200SFD Flex-ATX PSU
This power supply is overkill for the Breadbox PC, but it's the smallest and quietest I had handy. With the S2FC fan circuit (4.3V default voltage to fan), all Seasonic PSUs are quiet; the fan in this sample, despite being the same 0.25A-rated Adda used in the SS300, is especially quiet. It does not speed up at all in the Breadbox PC, as total power draw is extremely low - typically 26-28W AC, which translates at 65% efficiency to under 20W DC! Even while running benchmarks (PCMark 2002, Sisoft Sandra 2002) at full tilt, the highest AC power recorded was ~37W. In a case not made of plastic, I would happily use a low power, fanless, open frame PSUs, if it was readily available. As the plastic case is more flammable than steel or aluminum, the PSU fan provides extra assurance that component temperatures will never get high enough to pose any danger. After 30 minutes of benchmark testing in
a 23° C room, the CPU heatsink barely became warm to the touch.
|Help support this site, buy from one of our affiliate retailers!|