AOpen's Core Duo Flagship i975Xa-YDG motherboard

CPUs|Motherboards
Viewing page 2 of 6 pages. Previous 1 2 3 4 5 6 Next

SPECIFICATIONS

AOpen i975Xa-YDG Specifications
Processor
Intel Core Duo/Core Solo for Socket 479
Chipset
Intel 975X (i975X + ICH7)
FSB frequency
133-320MHz (with 1MHz increment)
Overclocking functions
Adjustable processor Vcore, Vmem, North Bridge voltage and PCI Express bus voltage.
Independently adjustable PCI Express clock rate.
Automatic CPU overclocking.
Memory
4 DDR2 DIMM slots for dual-channel
DDR2-667/533 SDRAM
PCI Express slots
2 x PCI Express x16
2 x PCI Express x1
PCI expansion slots
2
USB 2.0 ports
8 (4 on rear panel)
IEEE1394 ports
2 (1 on rear panel, via TI 1394a controller)
ATA-100/133
1 ATA-100 channel (in the chipset)
2 ATA-133 channels
(via ITE IT8212F controller, with RAID support)
Serial ATA
4 Serial ATA-150 channels
(with RAID support, implemented in the chipset)
1 Serial ATA-300 channel (on I/O panel)
(implemented via the JMicron JMB360 controller)
ATA RAID support
RAID 0, 1, Matrix Storage in the chipset
RAID 0, 1, 0+1 in ITE IT8212F controller
Integrated sound
8-channel HD codec: Realtek ALC880
Integrated network
Gigabit Ethernet controller: Marvell 88E8053
Additional features
IR Remote Control and Receiver
BIOS
Phoenix-AwardBIOS v6.00PG
Form-factor
ATX, 305mm x 244mm


The retail box is pretty big to fit all the standard accessories and parts.


Amazingly, the wee remote even features FSB up and down buttons!
Also shown above is the IR receptor; the other end of the cable fits into a header on the board.


The SATA connector is accessible from the outside;
photo above shows supplied data+power cable just about to be plugged in.


The supplied cable is half a meter long, which is useful only if the motherboard is in a system that sits atop a desk.



Previous 1 2 3 4 5 6 Next

CPUs|Motherboards - Article Index
Help support this site, buy the AOpen i975Xa-YDG motherboard from one of our affiliate retailers!