I had some upgrade changed the PSU LiteOn on FSP ZEN, and have solved write since there were questions about real rate of my heatsink on the chipset, and not just that will measure the m/b gauge. To rate of the heatsink temp measured by a multimeter. Measured directly in the center between edges abo...

Great thank's for test.
Only coil buzz is problem. I read test FSP ZEN at SPCR. Coil buzz is present at some rig and at some it is't present. I thinc if it's will be present at my rig i use epoksid glue and will glued coil complete .

How you think is PS 300W will be enough for you rig?
I have similar rig and think install fanless FSP ZEN 300W.
It have:
12V - 22A
5V - 20A
3,3V - 20A

Respect to you for spending the time to make that 8) That isn't another way for me. We do not have places where it is possible to buy Thermalright HR-05 SLI, and even if it would be possible, it all the same would not get into my rig any side. So I try to do selfmade cooling. You use HR-05 SLI on s...

At me after I have put on a bottom of the case huge silent box for the HDD regular DFI cooler (m/b DFI LP NF4 Ultra-D) began to cope badly cooling. RPM rose up to 6000 at 55°С – 57°C. Clearly why - silent box has practically blocked an air flow to a cooler of a chipset. It was necessary to do a...

I shall tell about the epopee of struggle against noise HDD (Sorry for my bad English): One week ago has stopped to alter in 3-rd time boxing HDD for it has got me already the rumble. On 3-rd time has achieved this, now it is essentially impossible to define the disk works or costs even having put a...