HY I answer you about s1 in the fusion in the picture you cans ee a modded, bended, S1 working with 8800gt and a fan, scythe kaze jyu 100x100x12mm 1000rpm. i can add another jyu if necessary but in this condiction i have 60° max on gpu and the sistem is not udible anymore. http://img354.imageshack....

Thanks QuietOC

I've just oredered thermalright SI-128 SE!

I'll post the results compared to ifx-14.

yes g33m-s2l and i suppose g33m-ds2r have 1:1 and with e5200 fsb200 you can run memory at 200MHz, the board has a lot of memory multiplier steps from 200 to 533. Unfortunately the Gigabyte G33 motherboards a gone from Newegg. Only the Intel and Foxconn G33 motherboards are still in stock. :( yes i ...

p5k-vm is not good enough, it's very difficult to go over 380MHz FSB, trust me because a my friend change it to a ds2r and solve his problems. Anandtech ran the P5K-VM at 485MHz . But, yeah, the P5K-VM was expensive junk. I am certain the FSB wall is just a timing issue that the Abit IP35-E solved....

i'm not agree with you, g33m-ds2r can reach 560fsb and dfi p45 junior can reach 700-750 fsb and all are matx. P35 is a good mother but you dont need her to run a 200MHz cpu at 400MHz, p35 need if you want 600MHz with memory at 1200. But as i wrote e5200 cant reach 400fsb because it's low fsb wall. ...

ahh sorry... was thinking along the lines of a simple media/streaming server, less than 4 drives, no ups. I have one built with 3 drives running windows server 2008 and power consumption is around 59w load SPECS Commell LE-565 VIA C7 1.5Ghz 768 DDR 20gb 2.5" Toshiba 2x640 WD AAKS Sparkle 180w MATX ...

Accelero S1... just need to bend the last few fins. :D Any particular reason why it's an AMD build? For your situation, I would go with an Intel E5200 instead of the 6000+. The E5200 performs similarly but consumes less power and is easier to keep cool. I quote you! It's the best solution for 2480/...

absolutelly fusion remote with a enermax modu82+ 425W. i have fusion and fusion remote too and the second one with the remote is really an htpc enclosure the normal version not much! only one thing for me is better in fusion than in the remote, VFD is better than lcd more clear and smooth than the t...

I can suggest you the TT blueorb2 67mm tall and can run 4850e passive for sure in the fusion mini because can run passive.

I fyou want a heatsink with fan you can buy "articcoling freezer 64 LP" that is enough silent.

In my opinio the fusion remote is the best for colling a cpu passive.

I used e1200 and e5200 passive with TT blueorb2 but with 430 I suppose that can run passive qith goldenorb2 that cost less.

Blueorb2 is very cheap hetsink try it!

the best mothers matx are gigabyte, g31m-s2l reach 380fsb very easily and my g33m-s2l reach 500fsb. Haha, I might agree. I had a $41 G31M-S2L run a E7200 @ 3.8GHz. I am also considering the Biostar motherboards. This Foxconn/TUL board is rated to work at 400MHz FSB, so I might just need to do the B...

You reach 4000 with e5200? No, no better than 3.25GHz so far. I sold my nice Abit IP35-E motherboard before I got my E5200. I have a $40 G31 motherboard right now--which was probably a mistake--drive corruption. :( the best mothers matx are gigabyte, g31m-s2l reach 380fsb very easily and my g33m-s2...

Please I need to know if nijia mini can cool e8600@4000 with a jyu better than TT blueorb2 with slipstream 800@400 before purchase it! :) :wink: 4GHz--that's pretty good. I don't have any doubt a Ninja Mini is going to keep that thing cooler than the BlueOrb thing. I wouldn't be running that expens...

Hy I need an opinion if the nijia mini with one scythe kaze jyu 100x100x12mm 1000rpm can cool an e8600@4000 1.15V. Now I've the TT blueorb 2 with a slipstream 800@400 and run @4000 in 42° in idle and 65-70° in full. My case is Antec fusion and the two side fans are both slipstream 500. I've modded...

This is my sistem an as you can see it's very similar to this http://img106.imageshack.us/my.php?image=10052008125wx1.jpg you can't here it all the time. my fans now are 3 tricool at 5V and medium so the fans run at 3.5V, two on top and one in front of psu. 3 CM 13DB 700rpm at 350rpm (under motherbo...

I've two antec case, the Fusion and the P182 and I've no problems with fans. I've connected all my 5 tricool fans on 5V an set all to medium and they spinning all the time. At 5V and medium setting we have about 3.5V on the fans, tricool has 3.2V of starting voltage. Have you checked your connection...