Hi jhhoffma ! and thank your for your reply, I would able to connect the fan to a kaze (fan controeller by Schythe)that require a rpm signal (yellow) cable. is there anywhere a possibility to achieve this ? I removed the Antec logo of the fan and on the pcb where I could pick this ? I am thinking th...

Hi ! in my p183 with enermax modu-87+ , noctua heasink I would turn off by Kaze fan controller the antec tricool fan. (high cfm seems better than my noctua (seems) but so noisy) the big question is : I can connect that fan to my controller fan ? NOTE: the fan HAS 5 wires (3 for the switch H ML ( I s...

according to this http://www.antec.outervision.com/PSUEngine your config seems request 238W (without video card). My doubts are about the Semi fanless feature of the seasonic. I think that anyway every 2-3minutes, in a not so cold environment, the fan starts. Note those 3 FAN can make a lot of noise...

thank you !

Tephras wrote:This is from the SPCR review:

1 - ATX connector (580mm) 20+4 pin
[...]

Hi, in the x650 How long are the cables? on internet I cannot find an answer. In my cabinet p183 I have a problem with my psu (xspice) that has the cable for 4 pin EATX12V (look at the top of the MB) of only 20"...:shock: I would fit all the cables in the rear of motherboard... but seems hard. Thank...

thank your for replies, looking here: article986-page5.html Antec 850 it's good but seasonic and even nexus (that costs less) it's really better. the question it's "solved " by the numbers but I would know if there so big difference ( according also of tester says). INAUDIBLE is written for nexus is...

Hi everyone! a question about a "perfect " psu choice for an i7 pc. the case is a an Antec p 183 I think that with 1 only vga card (1 hd ssd) a 500W psu it's quite good. I want a quite, really quiet ,one: so a seasonic x650 could really a good improvement in my case ? or a nexus nx5000 is perfect an...