Damn that 12v reading cannot be right ? Motherboard voltage sensor are generally not to be trusted, especially if the system has otherwise shown itself to be stable. Although I'm mighty impressed by Psyco's overclocking, I don't exactly believe that this is a quiet machine (though I expect that it'...

I'd run Prime 95 for at least 24 hrs to assure stability. That's a fairly large OC on stock voltage. I know. If you look at the pics you can see I stopped them manually after running for over 30 hours. I am surethis thing is rock solid, I have run Clibench for sevreal hours as well and I have run S...

Ok, the voltage reading using motherboard monitor reads 11.86 to 11.83volts at idle and that is what the BIOS says as well. In motherboard monitor under full load it says it sags to 11.8. To me the machine is very quiet. The case is a steel one. The power supply fans seem to be barely running at all...

This thing is in an antec case with panaflo lows on it. 550watt EPS12 Antec Power supply, and stock heatsinks and AS3 applied @ stock VOLTAGE. Instead of 16X100 they are @13X200 Room temp is 61 degrees. in a normal 70-75 they hold at 40C. http://cwilliams649.photosite.com/~photos/tn/3_1024.ts1108384...

I just got a new work machine. a Dell , it has a 3Ghz Prescott in it. I will be folding when I am not at work


Thought I could help a little.....

On the Poweredge700 we have at work, and the P4 machine I am getting at work, that happens to also be a dell, THen heatsinks are not just generic aluminum ones. THe one in the poweredge is quite tall and and has fins in a stack with 3 heat pipes coming out of it and ending at the top. THe dusting ex...

As soon as my buddy can get one from the US dealer, I will have a 2000. I will post as many pictures as requested!!! I will see if we can get tehm in black to.... :)

uhmm, they have the same back and they DO show the back of it...


http://www.lian-li.com/products/pcv2100.htm

http://www.lian-li.com/products/pcv1100.htm

I would use the JMC 1225L fan. It puts out close to 60cfm and spins a couple hundred rpm lees then the Panaflo Lows do. It is 25mm thick. I have that case also. I use a Panaflo for the exhaust and a JMC for intake.

I really like the single 120mm fan too but I liek the fact that the true Power series is a better power supply. All three rails are discrete circuits from themselves.

Oh hell. I have an Enermax controllable fan pwrsupply. It is a 430watt version. I am really thinking about either modding it or getting an Antec True Power 380watt and putting Panaflo Lows in it , 80mm and a 92mm. Think it is worth it? I really hate the damned noise from the rear 80mm on the Enermax...

Nice man. It looks very similiar to my setup. :) I do a LOT of case modding at the Local store I work for and for my friends. I thought that I sould live with not touching the case and leaving it as is. HAHA. I moved my system over to it Friday and Sunday I was back in the shop with my RTX and cordl...

I have got the Antec case in question. I have punched and grommet mounetd the fans in the case. I used a Panaflo Ultra 120mm in the rear and a JMC 120mm fan in the front. I am telling you that all though you "can" wedge a panaflo low in front of the drive cage, it is not worth the effort. I tried fo...

I have got the Antec case in question. I have punched and grommet mounetd the fans in the case. I used a Panaflo Ultra 120mm in the rear and a JMC 120mm fan in the front. I am telling you that all though you "can" wedge a panaflo low in front of the drive cage, it is not worth the effort. I tried fo...