ABIT NF7-S
Barton 2800+
1GB Kingston HyperX PC3000
ATI 9800NP 430/330 .
Seagate 60 and 40 Gb ATA133
Lite-On CDRW
Lite-On 811S DVD-RW
Logitech Z680.

Deep Blue.......... near silent and awesome to my eyes. i`m sorry for the crap pictures but the webcam is not very good as you can see........ please comments and suggestions are very appreciated! Thanks to everyone who helped me out! http://www.offreviews.com/pictures/Image003.jpg http://www.offrev...

yep I`m pretty sure. Anyway I didn`t connect it....also because the lights inside will them if it is on or not!

Well......I didn`t succeed in the task.......but my computer is up and running.........after 2 hours and something I finished....the only cable you can see is the power that goes to the Video Card.....



And is very very less noisy than the other one!!!

wOOt!!

I have an Abit NF7-S....

the problem is that I have a 2 pin connector that I should cut in half....

but how?

Guysss....

I need help as soon as possible! I`m building my PC in the new case although I have a problem.....

the POWER LED cable that goes to the motherboard...should be 3 pin...BUT the new case has it with 2 pin!!!

I'm lost!! What do i do??

I need help again!

The power LED cable in this case has two pin .... and my motherboard accept a 3 Pin POWER LED.....

I'm lost.

What do I do?

Great!

Thanks a bunch....will donate!

hmmm I should have been in bed....I was exausted..had two Tests in University....anyway.... thanks for the feedback I`ll do as you suggested. That case is great! EDIT: Did you cut your grills on the fan or left it like that? What about the front fan....anything special you did there to improve airfl...

Got one question for ya....

Where did you put your Temps gauges and how?

done....came off!!!!!!!!

Woooooooot! THANKS A LOTTT!! How can i repay you?

THANKS SO MUCHH..

I'll try that right now.............

I did that...removed the 2 screws in the front and still it does not want to come off...............

I need help!!

I can`t remove the right panel on my Antec P160!!

Looking at front of the case...the right panel....can`t remove it!

I removed the two screws...but its seems that the lower part its soldered.... I know its impossible...but its strange...doesn't want to come off..


HELP!

Thanks for the reply

ahrbruz... how is it going,.....?


I`m waiting for my P160. Should be here on Thursday.

Anyway....I saw the safety Mat in Home Depot...but does it really reduce the noise well? Otherwise I can only affor PAx.Mate, nothing else.

i`ll look up those fans you recommended Ralf...
thanks a lot.

hmm thanks for the replies guys.......

I 'm looking at a Vantec Stealth 120mm

1500 Rpm
58CFM
28dB

I think its a good one.

Guys....
what are the 120mm fans that are most quite while having the greatest CFM?



Thanks

Thanks a lot !!

I hope I'll be successfull!

hmmm i`m off to HomeDepot tomorrow then!! WOOT!!

Great infos ahrbruz, thanks a bunch!

i`m ordering the P160 this week!

Great! Thanks for those infos....do you feel it increased the temps a lot inside?

hmmm no companies around here.

hmm good point there chylld.....like stereo company for home theaters or stuff?

Cool job there!!

Thanks for the pics.....what material are you using to damp noise?

heya....

I was following this thread and in the end....there's no other damping material CHEAPER and as good as the AcustiPack ...correct?

ahrbruz

that its still inaccessible!

and thanks for the info....

Nice rig wow!

Thanks Trip...great links there!! The main problem I have is that the EXOS has very small tuding although its performance is at the same levels of 3/8" tbing. Also it has a somewhat not very powerfl pump and when you use 4 Waterblocks it becomes affected by that. BUT, I don`t want to use a custom wa...

sthayashi, thanks for the suggestions.

I think I might go for it.

Anyone else has comments?