I was using the PC health menu in the Bios.. I figured it would be the most accurate. Really happy with this new PSU.. Only bad thing is beucase it moves less air there is more heat in my case... plus I just went from a FX5600 to a 6800 video card so my case temps really creaped up. I have an Artic ...

This PSU is much quieter then my Antec 430 True.. IM also getting much better 12V readings.. My antec was giving me 11.7-11.8 on the 12Volt side and the Enermax 420W is giving me 11.98-12.04. I have 3 hard drives two of them are SATA raptors, Geforce 6800, and a Plextor DVD burner along with 3 case ...

I read a couple the other day... one about an Aopen video card that burned up and even glowed orange inside the guys case LOL. I read some more about some power supplies but cant remember how they worded them. I do see more good reviews then bad.

Ive been an overclocker for a long time so the term Silent and overclocking never seemed to work well together. Seems to me heatsinks, fans, and controllers have come a long way and I can now get the best of both worlds. Here is what I have done to my rig so far.. Vantec Nexus 3.5" bay 4-fan control...

Just read a reviews where it didnt rate very well... 70% eff. vs 80% of the Enermax Noisetaker. The site also mentioned that they used small heatsinks and small capacitors as well. I just orderd the Enermax Noisetaker 420W to replace my antec 430W true.. the main thing im looking for is less noise a...

http://www.newegg.com/app/ViewProductDe ... 935&depa=0


Im looking at getting this or the enermax noise taker 420W. Thanks for any input.

Found a 420watt through newegg for 68$ shipped.. will it run my setup>

XP3200
2 raptors
1 200 gig
1 DVD burner
FX5600
floppy
3 case fans
1 panaflow on heatsink
1 fan controller

What about sticking "L" panaflows inside my antec PSU? The enermax I want is 75$ shipped 470W... I can stick two panaflows in my 430W for $20.

I currently have the Antec True 430 watt and feel that it creates teh most noise out of my system.. I have an SI-97 heatsink with a High output panaflow along with 3 vantec stealth fans that are controlled on a Nexus controller.. with controller turned all the way down the temps are fine and the noi...

New heat sink SI-97 works perfect.. my temps dropped BIG time.. im seeing 54 at idle with all my fans turned down as low as possible and 60C under full load with fans all turned down. Very impressive heatsink.

I have an nforce 2 ultra mobo.. do I just turn on SMART DRIVE? What does that do?

Just trying to find out hte best way to do this.. I have 2 raptor drives and a 200 gig 7200rpm in my case.. with 2 stealth (I know they arent the best) fans in front of these drives... all on a Vantec Nexus controller. I just want to make sure they are staying cool enough.

I had planned on giving these a try

http://www.directron.com/noisestrips.html

Will they fit between the drive and drive cage on my lian li 6070B? I have two raptors and a 200 gig I will be using these on.

Thanks for any advise!

Ok I read up on it... pretty neat idea. I think what I can do is use some pieces of silicone strips I have and lay them between the drive cage and the case.. there is a metal tab that fits into a slot that I can remove to eliminate a contact point. Two screws hold the drive cage down but I can use s...

suspending how?

I purchased a 6070B about a week ago and need some help making it a little more quiet. I did use vantec stealth fans which I would have gone with panaflow or something else if I had joined this forum earlier. I do have them on a Nexus fan controller so they are quiet when turned down and still seem ...

Im seeing 64C right now just surfing the net... it hits in the 70s.. and its running at XP3200 speeds at 1.775V. Havent had any real lock up issues.. If i drop the voltage down to 1.75 it will blue screen on me in games. I havent gamed tho with this new case becuae my temps went up some.

Yeah.. Ive even lapped the sink and used artic silver 5... im starting to wonder how accurate the temp are im seeing. I have the lastest bios updates. I just installed a Nexus 4 fan controller and like the fact I can turn it down when not in use. I think the SI97 with the 57 cfm panaflow on the fan ...

I got the 35db 57cfm fan and SI-9 on order.. im going to put it and my case fans on a nexus fan controller so I have the adjustability if I need it. I think I need to dampen some more pieces inside my PC6070B as they dont dampen the floor of the case and only parts of the front are done.

Is this fan for real? My Stealth fans are 21db at 27cfm and 14 db at 28cfm is incredable.

The panaflow I listed is the one Thermalright recommends on thier site. Ive used thier 57cfm fan on an XP90 for a friend and it was just a hair louder then I want.. but overall wasnt to bad. Where is a good place to buy the SI97?

Ive been reading the SI-97 is better at cooling then the HT-101 but cant find a good comparison betwen the SI-97 and the SP-97. I plan on using the Medium 92mm panaflow fan 48cfm @ 30db which should be much quieter then my 38db Aeroflow. Any opinions?

I have an XP2500 @ 2.2ghz 1.75V. I have a Lian Li PC6070B with all the stock 80mm fans changed out for Vantec Stealth fans. My current heatsink is a Vantec AeroFlow with TMD fan. I have a Giant II cooler on my FX5600 video card and also Have 2 raptor hard drives and a 200 gig WD for storage. My curr...