RF interference and computers: Experiences anybody?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Friend of SPCR
- Posts: 228
- Joined: Sun Sep 29, 2002 9:05 pm
- Location: Powell River, BC, Canada
RF interference and computers: Experiences anybody?
RF interference... Sheilding... Unshielded cases...
It's a topic that comes up often. There are all kinds of do's and dont's. Is it all theory? How bad is the problem, is it a big deal? Which way does it work: does the computer bother other things, or do other things bother the computer? Questions questions questions. So I pose the question:
Question to the forum: what experiences have you actually had with RF interference and computers.
How did you notice the interference? What was happening? Was it a problem? How did you eliminate or avoid it? What was the hardware involved? Was it modified, and how? Do you run an unsheilded computer and yet have no interference problems?
I would gladly offer my experiences: essentially none. I have never seen any computer electrical interference. I do not discount this problem, but am extremely curious to find out what it actually amounts to in the real world.
Thanks, in advance. I hope this is an informative exercise.
It's a topic that comes up often. There are all kinds of do's and dont's. Is it all theory? How bad is the problem, is it a big deal? Which way does it work: does the computer bother other things, or do other things bother the computer? Questions questions questions. So I pose the question:
Question to the forum: what experiences have you actually had with RF interference and computers.
How did you notice the interference? What was happening? Was it a problem? How did you eliminate or avoid it? What was the hardware involved? Was it modified, and how? Do you run an unsheilded computer and yet have no interference problems?
I would gladly offer my experiences: essentially none. I have never seen any computer electrical interference. I do not discount this problem, but am extremely curious to find out what it actually amounts to in the real world.
Thanks, in advance. I hope this is an informative exercise.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Only one, not with my computer but someone else's. She was on a cell or wireless phone wnne we were talking. Seemed a little buzzy, but no big deal. Then she tried to do something on her computer, can't recall what, and the connection got quite garbled till she stopped and stepped away from the desk. That's my one experience.
Mobile phones ringing make my speakers crackle like crazy.
For a while I had my case off, whenever the PC was on, the TV a few feet away was un-watchable. I noticed it through the signal being 50% noise and the sound being muffled crackles =P
It was a P2-300 with 128mb RAM, a Voodoo Banshee and a bunch of other stuff that I'd imagine put out far less EMI than a modern PC. The only other electric thing in the room was the light, so I can't really say what effect it'd have on other complex electronics, but it probably wouldn't be good.
For a while I had my case off, whenever the PC was on, the TV a few feet away was un-watchable. I noticed it through the signal being 50% noise and the sound being muffled crackles =P
It was a P2-300 with 128mb RAM, a Voodoo Banshee and a bunch of other stuff that I'd imagine put out far less EMI than a modern PC. The only other electric thing in the room was the light, so I can't really say what effect it'd have on other complex electronics, but it probably wouldn't be good.
I've been running my system unsheided for 8 or 9 months now, with no ill effects. I often sit at my desk and talk on the cell phone.
On a related tangent: Isn't part of the reasoning behind EMF sheilding that it is supposed to project the computer from incoming waves? Has anybody had a computer related failure attributable to EMF?
On a related tangent: Isn't part of the reasoning behind EMF sheilding that it is supposed to project the computer from incoming waves? Has anybody had a computer related failure attributable to EMF?
I had a Sharp MZ-700 when I was a kid (Z80A processor @ 3.5 MHz). When it was turned on, the TV image got some rolling stripes (not the small one which got the signals from the computer, but the living room TV that got its signals from an antenna (which was in the attic over the computer)).
Never experienced interference with modern computers.
Never experienced interference with modern computers.
-
- Friend of SPCR
- Posts: 228
- Joined: Sun Sep 29, 2002 9:05 pm
- Location: Powell River, BC, Canada
I don't know if that's a correct assumption. New systems are running most components at much lower voltages, at much higher frequencies, and using much less power doing it (per operation, the power goes up because the number of ops. has gone way up). That could actually cause a big reduction in switching noise (transistors turning on-off-on-off), as well as putting more of that noise into higher frequency ranges where we generally notice it less (TV's and radios are fairly low freq stuff), except maybe with things like cell phones (800mhz and up). Also I wonder about older vs. newer PSU's and HDD's, both of which have been improved lots in the last few years.Alicey wrote:It was a P2-300 with 128mb RAM, a Voodoo Banshee and a bunch of other stuff that I'd imagine put out far less EMI than a modern PC.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
I asked C3, the acrylic case people, about RF interference with acrylic cases. Here's their reply:
"We have not experienced any problems related to EMI/RF. Most all PC internal components made today are shielded from EMI/RF interference even without the protection of metal computer housing. We do recommend using round shielded IDE/Floppy cables as most IDE ribbon type cables do not offer any type of shielding. Many of today's computer cases incorporate some amount of plastic either in their front panel covers, floppy drives, CD-ROM drives, cooling fans and so on. If you have ever taken apart a laptop computer you know that it’s entire enclosure is made of plastic. Just because the plastic in our cases is clear does not mean that it offers less protection than the solid color plastics used in conventional cases and laptops.
"The real world test would be to remove the side panel of the computer you are currently using and if you do not experience any problems, you most certainly will not have a problem with our case."
Similar reply from ClearPC...
Although neither of them are likely to say 'yep, our PCs are a RF nightmare', their replies are broadly in line with other posts I've seen.
"We have not experienced any problems related to EMI/RF. Most all PC internal components made today are shielded from EMI/RF interference even without the protection of metal computer housing. We do recommend using round shielded IDE/Floppy cables as most IDE ribbon type cables do not offer any type of shielding. Many of today's computer cases incorporate some amount of plastic either in their front panel covers, floppy drives, CD-ROM drives, cooling fans and so on. If you have ever taken apart a laptop computer you know that it’s entire enclosure is made of plastic. Just because the plastic in our cases is clear does not mean that it offers less protection than the solid color plastics used in conventional cases and laptops.
"The real world test would be to remove the side panel of the computer you are currently using and if you do not experience any problems, you most certainly will not have a problem with our case."
Similar reply from ClearPC...
Although neither of them are likely to say 'yep, our PCs are a RF nightmare', their replies are broadly in line with other posts I've seen.
-
- Friend of SPCR
- Posts: 228
- Joined: Sun Sep 29, 2002 9:05 pm
- Location: Powell River, BC, Canada
Thanks leem. C3 seems like a really cool company, and they gave a fairly interesting response. Nice that they didn't try to dodge the question. I have seen various forms of sheilding inside laptops though, including metal/conductive paint. The plastic alone offers absolutely no sheilding, not theirs or anyone else's. I don't think it's always a complete non issue. Their test of "remove the side panel..." seems like an honest, practical answer. It's what I would do. And the recommendation to use sheilded cables seems like a good one to, for airflow and cosmetics as well as RF. Otherwise I bet those cables would be amongst the worst antennea in the whole system.leem wrote:I asked C3, the acrylic case people, about RF interference with acrylic cases.
I have noticed that if a GSM mobile telephone is in use near a mouse then it can trigger mouse movement or clicks. This has happened with a few different telephones, mice and computers.
I used to get interference on the radio if I was running the monitor at certain resolutions/frequencies.
I've known cheap PC speakers that pick up noise from all sorts of things. Door-buzzers and GSM telephones are the worst culprits.
I used to get interference on the radio if I was running the monitor at certain resolutions/frequencies.
I've known cheap PC speakers that pick up noise from all sorts of things. Door-buzzers and GSM telephones are the worst culprits.
I've run various systems with no case/cover and haven't noticed any EMI/EMF grief - even when using the system near audio equipment or as a HTPC with all sorts of audio/video cables in close proximity to the system.
As people mentioned, cell phones are a different story. If my phone is near my IBM Trackpoint keyboard and the phone rings, the mouse starts moving across the screen by itself. Scary.
As people mentioned, cell phones are a different story. If my phone is near my IBM Trackpoint keyboard and the phone rings, the mouse starts moving across the screen by itself. Scary.
Electrical interference with TV
if i took off the side from my pc (a fair few cheap fans inside) the TV picture wasn't so good - stripes etc. Since putting in new fans (coolmaster and zalman) the stripes have gone