It is currently Tue Dec 10, 2019 5:48 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Just made my first anechoic chamber! :D
PostPosted: Sat Jan 23, 2016 7:36 am 
Offline

Joined: Wed Dec 16, 2015 11:53 am
Posts: 37
Man that was terrible work, I used about 5 square metres of molitan (local business name of PUR foam) and couple more of acoustic wavelet to cover the sides from inside. That cheap sound meter toy of mine shows 38.7 dB in silent room. Better than nothing I guess. I'll go to try the first PSU inside. If all goes well, I should also be able to measure PC cases there, though it won't be as good as it should be - there is not THAT much of space inside so it'll be about 20 cm only from the front of the cases to the meter. And don't tell me anything, the chamber is already huge as it is, designing it for the biggest cases on the market would be terrible. This old carton box from our 1990s Finlux TV set was the biggest thing I found anyway :mrgreen:

I don't aspire for any real sound measurement for the moment, more like comparison between different HW. But for a start, lets at least do it wannabe properly, not just sticking the meter somewhere around the device in ordinary noisy room, right? :D


Top
 Profile  
 
 Post subject: Re: Just made my first anechoic chamber! :D
PostPosted: Sat Jan 23, 2016 9:03 am 
Offline

Joined: Wed Jun 13, 2007 10:12 am
Posts: 5275
Location: ITALY
HA HA Pavel, you're unbelievable! :wink:

Did you take some inspiration from Mike's works? :roll:

_________________
Regards,
Luca

Support SPCR, use these links when you buy: NCIX, Amazon and Newegg


Top
 Profile  
 
 Post subject: Re: Just made my first anechoic chamber! :D
PostPosted: Sat Jan 23, 2016 9:09 am 
Offline
Moderator

Joined: Thu Oct 06, 2005 4:36 am
Posts: 7363
Location: Monterey Bay, CA
What's the measurement outside of the chamber?

_________________
1080p Gaming build: i5-4670K, Mugen 4, Asrock Z97 Anniversary, MSI GTX 1050 Ti Gaming, 8GB 1866 RAM, Samsung 860 Evo 500GB, Crucial MX100 256GB, WD Red 2TB, Samsung DVD burner, Fractal Define R4, Antec True Quiet 140 (2 front + rear) case fans, Seasonic SSR-550FX. 35W idle, 45-55W video streaming, 170-200W WoW, 318W stress test (Prime95 + Furmark)

Support SPCR through these links: Amazon and Newegg


Top
 Profile  
 
 Post subject: Re: Just made my first anechoic chamber! :D
PostPosted: Sat Jan 23, 2016 10:04 am 
Offline

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 3549
Location: Guatemala
This is something that i do want to do in time.... and money allows.

_________________
GameMi - Intel i9 9900K + Gigabyte Z390 AM + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris


Top
 Profile  
 
 Post subject: Re: Just made my first anechoic chamber! :D
PostPosted: Sat Jan 23, 2016 11:54 pm 
Offline

Joined: Wed Dec 16, 2015 11:53 am
Posts: 37
quest_for_silence wrote:
Did you take some inspiration from Mike's works? :roll:

Not really, I've read that when I was almost finished :) This is just a mobile box chamber…
CA_Steve wrote:
What's the measurement outside of the chamber?

Slightly over 39. The room is absolutelly silent, as long as I an not deaf. I even took it to countryside to a house with thick walls, another nearest house is at least 30 m, during winter night at about 01:00 in another silent room again 38.8 dBA. I think the chinese toy I got (GM1358) just has very shifted lower treshold. It is very sensitive, but should measure from 30 dBA. I think it is not linearly sensitive, that's the problem. As normal speech should be about 60 dBA and that's where I am. Anyway, as I said, I do not aspire on providing valid absolute value of noise, more like comparing for the time being.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group