Page 2 of 2

Posted: Tue Jul 19, 2005 12:40 pm
by perplex
why are you disappointed its not SATA300? even the ATA100 wouldn't be a bottleneck, nevermind SATA300!

Posted: Sat Sep 10, 2005 8:18 am
by Chaendler
Do you know how to realize if the NCQ is now working on my winxp sp2?
Thank you.

Posted: Thu Dec 08, 2005 2:19 pm
by frostedflakes
Just curious, does anybody know if Samsung plans to release single-platter models, such as 80GB and 120GB? Also, is there any acoustic difference between the SATA2 and IDE versions?

Posted: Thu Dec 08, 2005 10:58 pm
by Tephras
Well, as mentioned by Jan Kivar there is at least a model number for a one platter 120GB HD from Samsung. It might even be available......if you live in Poland.

Posted: Mon Dec 19, 2005 3:35 am
by BangoO
Devonavar wrote:AAM does have an effect. The reduction in power consumption and the test on the vibration box confirmed that. However, it's effect on the airborne acoustics is almost nothing; the reduction is almost entirely in vibration and whatever noise it causes. Also, keep in mind that it's seeks without AAM are already at a level of noise that is at or below most other drive with AAM.
I just bought one, a 250gb.
Seeks are very loud, a lot more than all my other drives with AAM (Maxtor, Samsung, IBM).
I can't keep it in my P180, it's just far too noisy :(
Enablind AAM did not change anything about that...

Could my drive have a problem ?
Are there different models ?

Posted: Mon Dec 19, 2005 7:13 am
by andyb
Have you tried the drive outside of the case.???

Are you certain you saved the settings when you changed the AAM settings.???

A few people who have got P120 drives (myself included) witnessed the drives becoming quiter within the first 7 days of usage, yours might be much quieter in a few days time. You may however have a bad sample, or one that has been damaged by shipping/handling, the biggest reason for DOA drives.

Andy

Posted: Mon Dec 19, 2005 7:40 am
by BangoO
I have not tried it outside of the case, but I will.
It's still gonna be very noisy I'm sure...

I'm sure I applied the AAM settings.

I'll wait a few days to see if noise decreases, otherwise I'll return it or keep it for storing data outside of the PC.

Thx ;)

Posted: Thu Dec 22, 2005 1:15 am
by sneaker
Speaking from memory (haven't done a side-by-side comparison), I'd say the seeks on my SP2504C are nowhere near as muted as those on my SP1614N. The AAM setting doesn't make much difference, whereas enabling AAM on the SP1614N made a big difference. The SP2504C's seeks seem to be roughly the same noise as the SP1614N's were with AAM disabled.

Posted: Tue Jan 31, 2006 3:20 pm
by MikeC

Posted: Tue Jan 31, 2006 3:38 pm
by qviri
There's a "<tbody> </tbody>" left over at the top of the acoustic measurements table.

Posted: Tue Jan 31, 2006 4:25 pm
by acaurora
I told mike about the lost tags as well.

I personally do have this 250 GB drive in a Nexstar3 external, and I must agree with everyone that it is a very nice and quiet drive. Seeks are very dull, not obtrusive at all. As for thermals, runs a little warm, but it's expected. Could be resolved with probably a better enclosure, hehe.

One thing I do also want to comment on is the startup of this drive. If I recall correctly this drive has a feature called Staggered Startup, or something like that. Just to let you all know that when you turn on this drive, it does, indeed, have a rather odd startup sequence. It spins up like any other hard drive, but, and I'm guessing it's because of this feature, the noise sounds kinda jittery, as if it's "trying" to start up. Don't get me wrong, it's nothing to be alarmed about, and after that it sounds fine. I just want to give you guys the observation of the rather "staggered", no pun intended, noise that this hard drive exhibits upon startup.

Posted: Wed Feb 01, 2006 12:54 am
by winguy
I'm contemplating between SP2504C and SP2514N . Will there be any significant power savings going with the PATA model? SATA cables seem easier to manage though.

Posted: Wed Feb 01, 2006 12:54 am
by Devonavar
Uhh ... staggered startup has nothing to do with the speed of the startup. It's a feature that can be used by the drive controller to spin a large array of drives up in separate batches to reduce stress on the PSU.

I suspect what you're hearing is related to the changing resonances within the drive as it spins up. The Samsung is certainly not the only drive that sounds rough (although I don't recall our sample sounding like that). Hitachi drives in particular seem to be very noisy (and have a lot of variety in the character of the noise) when starting up, but are quietest when they are spinning at full speed.

Posted: Wed Feb 01, 2006 12:57 am
by Devonavar
winguy wrote:I'm contemplating between SP2504C and SP2514N . Will there be any significant power savings going with the PATA model? SATA cables seem easier to manage though.
Define "significant". I would expect the savings to be ~0.5W ... which I wouldn't usually consider significant. Also, if the SATA version supports link power management (can't remember off the top of my head) the difference will be negligible. However, link power management must be supported by your controller as well, and I don't believe most integrated controllers support it. Some more research might be in order here...

Posted: Wed Feb 01, 2006 4:01 am
by Sooty
Thanks Mike, but most people’s experience in this thread, is not consistent with SPCR’s review. If there’s significant sample variance, should this not be mentioned by SPCR?

Posted: Wed Feb 01, 2006 7:33 am
by MikeC
Sooty wrote:
Thanks Mike, but most people’s experience in this thread, is not consistent with SPCR’s review. If there’s significant sample variance, should this not be mentioned by SPCR?
You've linked the other discussion thread here, which is good. But we have NO experience with sample variance, significant or not. Our experience is limited to ONE sample of each of these models.

Please don't ask us to make statements about things we cannot verify; in the long run, you -- and all SPCR readers -- would be much more poorly served if we veered from that principle.

Posted: Wed Feb 01, 2006 9:19 am
by CGameProgrammer
On the other hand, you do usually mention at a review's end if there are problems or anamolies reported in the forums.

BTW the 250 GB model is available on NewEgg for $100, even though the older original article lists the 200GB model as being $110. That model is actually discontinued now, I'm pretty sure.

Posted: Wed Feb 01, 2006 12:18 pm
by sanse
i'm using one of those in my silentium rig in the lowest 3.5' bay. not isolated. it's a fast silent drive. only when hibernating the machine i can hear windows switching it off. normally and after warming up it's hardly audible over the psu-fans.

Posted: Fri Feb 03, 2006 9:24 am
by Sooty
MikeC wrote:
Sooty wrote:
Thanks Mike, but most people?s experience in this thread, is not consistent with SPCR?s review. If there?s significant sample variance, should this not be mentioned by SPCR?
You've linked the other discussion thread here, which is good. But we have NO experience with sample variance, significant or not. Our experience is limited to ONE sample of each of these models.

Please don't ask us to make statements about things we cannot verify; in the long run, you -- and all SPCR readers -- would be much more poorly served if we veered from that principle.
I wasn’t asking SPCR to verify anything with a statement. All I’m suggesting, is what CgameProgrammer stated...
CGameProgrammer wrote:you do usually mention at a review's end if there are problems or anamolies reported in the forums.
SPCR’s review and recommended list, doesn’t give a clue to the numbers of disappointed P120 owners, whose drives turned out much noisier than SPCR’s review samples. I was asking for a mention / postscript to this, in SPCR’s review/recommended list, with a link to that thread, so people are made aware of the odds, before investing their hard earned. That’s all :)

But let’s hope it was just a bad batch...

Posted: Fri Feb 03, 2006 9:34 am
by dfrost
Frequently it is only the disgruntled that comment. My Samsung SP2004C, purchased and installed in August, 2005, continues to be cool and very quiet with m0002a's Sonata isolation method. I am definitely not a disapponted P120 customer.

Posted: Sat Feb 04, 2006 11:11 am
by Gxcad
ddrueding1 wrote:Nice review, though I'm now using 2.5" Samsungs and 400GB Seagates.

FYI: In the conclusion there is a reference to a P180. I assume you ment P80 in this review.
Your commend interested me ddrueding1, do you then use the 2.5 samsung as a boot/OS drive and spin down your 400gb seagate when not in use?

-Ken

Posted: Sat Feb 11, 2006 4:43 am
by kogi
Very happy with my 2 x SP2504C's. They are suspended in an antec titan case. I think turning on AAM actually did decrease the seek noise with mine.

kogi

Posted: Sun Feb 19, 2006 2:36 pm
by CoolColJ
I bought the 250gig ATA100 version - and I am very happy!
Very quiet and much cooler than the Seagate IV it replaced

I already had the 160g verison and 2xSeagate IV 40gig in there already in my Sonata 1 case
This 250g doesn't have the reading thrum the 160gig version has, seems much quiter. Just as good as the old Seagate, but way bigger and much cooler.

straight out of the box as well, I didn't fiddle with any settings either

Samsung SP2504C

Posted: Wed Jan 31, 2007 6:42 am
by mstielau
Just to add another data point to the excellent information provided on this site, I just received my Samsung SP2504C and wanted to share my observations regarding its use in my new Mac Pro computer. The seek noise is indeed very unobtrusive, much quieter than the Seagate 250 GB drive which is also installed in the computer. (The Seagate sounds like a geiger counter.) Whereas the Samsung emits very little "whine", I feel that the one I received has an excessive amount of vibration-induced "hum", which resonates throughout the computer. Even worse, the hum is not constant; it rises and falls in intensity, with about 1.7 second cycle, peak-to-peak, which is very annoying. I know this variation in intensity is not a 'beat frequency' (acoustic interference with the vibration from the Seagate drive) because it is still present when the Seagate spins down. I don't know if this is due to a sample variation, or if they're all like this. Regardless, I will be returning it and will probably buy another Seagate, despite the excessive head seek noise.