It is currently Wed Aug 27, 2014 8:00 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 73 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Attack of the Scythes
PostPosted: Thu May 08, 2008 6:27 pm 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
Fan Roundup #5: Attack of the 120 Scythes

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 7:07 pm 
Offline

Joined: Sat Mar 29, 2008 7:05 pm
Posts: 239
Location: Toronto Ontario
Are you going to update the recommended fans any time soon? I'm eager to see if you guys rank the DFS122512L-PWM near the top.

_________________
You will never be strong enough
You will never be good enough
You were never conceived in love
You will not rise above


Top
 Profile  
 
 Post subject: slip stream compared to S-flex
PostPosted: Thu May 08, 2008 7:30 pm 
Offline

Joined: Sun Apr 13, 2008 4:32 am
Posts: 23
Location: ON, Canada
Great, my Ninja comes with the slip stream 1200rpm fan, it does sound very quite. Is the rpm rating comparable to the fan tests using the old method? I want to see how the slip streams compared to S-flex at the same noise level. Thanks.

Edit: Never mind, just saw you have mentioned that the rpm rating has come down. Will wait you update the data of S-flex fan. Thanks.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 8:25 pm 
Offline
Patron of SPCR

Joined: Wed Jun 25, 2003 4:01 pm
Posts: 281
Location: Victoria, Canada
One thing I'd like to see noted - the scythe fans represent great value. At least in NA, they are less expensive than most other premium fans - barely more than the generics.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 9:22 pm 
Offline

Joined: Thu May 25, 2006 1:19 am
Posts: 489
Location: Australia
next fan: slipstream 1200 :)


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 9:29 pm 
Offline

Joined: Sun May 04, 2008 7:51 pm
Posts: 69
Location: Tulsa, OK
Great review!

Anyone have any tips on modding the corners of the DFS122512L-PWM so it can be mounted on a Xigmatech S-1283?


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 9:37 pm 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
Fallsroad wrote:
Great review!

Anyone have any tips on modding the corners of the DFS122512L-PWM so it can be mounted on a Xigmatech S-1283?

Just take a hack saw to the corners. Plastic cuts easy. I've done this in the past by making two cuts at each corner, each cut just below the lip... then taking a sturdy pair of pliers and squeezing the unwanted portion of the corner. It takes some pressure, then the corner get's crushed, leaving clean edges as a result of the cuts. If you can visualize what I'm saying, try it maybe with an old fan. If not, don't do it, and don't blame me! :lol:

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 9:42 pm 
Offline

Joined: Sat Mar 29, 2008 7:05 pm
Posts: 239
Location: Toronto Ontario
Or use the answer to all of life's problems. zip ties! I use that fan too and here's how i mounted it to my ultra 120.

http://i128.photobucket.com/albums/p179/widowmaker314/04-06-08_1749.jpg

_________________
You will never be strong enough
You will never be good enough
You were never conceived in love
You will not rise above


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 9:47 pm 
Offline

Joined: Sun May 04, 2008 7:51 pm
Posts: 69
Location: Tulsa, OK
MikeC wrote:
Fallsroad wrote:
Great review!

Anyone have any tips on modding the corners of the DFS122512L-PWM so it can be mounted on a Xigmatech S-1283?

Just take a hack saw to the corners. Plastic cuts easy. I've done this in the past by making two cuts at each corner, each cut just below the lip... then taking a sturdy pair of pliers and squeezing the unwanted portion of the corner. It takes some pressure, then the corner get's crushed, leaving clean edges as a result of the cuts. If you can visualize what I'm saying, try it maybe with an old fan. If not, don't do it, and don't blame me! :lol:


Hm.

I'm trying to visualize it, and admit I'm not quite getting it.

I'm looking to remove the portion of the corner that ties the holes on the front to the back, preventing the use of the type of rubber mounts that come with the Xigmatech sink, which need to be pulled through the corner hole closest to the heat sink.

I'll have to poke around and see if I have any closed fans to experiment on.

Frankenfan!


Top
 Profile  
 
 Post subject: Question to Mike
PostPosted: Thu May 08, 2008 10:02 pm 
Offline

Joined: Thu Aug 09, 2007 9:06 am
Posts: 105
You did not include the S-Flex fans in this shoot-out. Would you like to comment on the reasons for this? According to Scythe specifications, they are quieter, RPM for RPM, as the winning Slipstream models - 20.1dB vs 24dB for the 1200 rpm variants.


Top
 Profile  
 
 Post subject: Re: Question to Mike
PostPosted: Thu May 08, 2008 10:21 pm 
Offline
SPCR Reviewer

Joined: Fri Mar 04, 2005 9:07 pm
Posts: 1023
Location: Vancouver
Dutchmm wrote:
You did not include the S-Flex fans in this shoot-out. Would you like to comment on the reasons for this?


The ambient noise level was slightly higher when we re-tested the S-Flex series, making it difficult to compare them directly with any degree of accuracy. Perhaps you would like to make a donation for the acoustic chamber? :D

Here are the results from S-Flex re-test:
http://www.silentpcreview.com/article695-page5.html#sflex

Feel free to draw your own conclusions.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 08, 2008 11:26 pm 
Offline

Joined: Tue Sep 03, 2002 3:50 am
Posts: 43
Location: France
The Ultra Kaze makes no sense in a no restriction environment.
Their real strength is their high static pressure, making them push a lot more air under high impedance. It has been proved though that they have no competition when placed on a watercooling radiator (from Martin on XS forums, so using proper testing methods), where their performance/noise ratio is way above the 25mm thick fans.
The conclusion of this SPCR article is not surprising: it's just the confirmation of what has been known for a while, the Slipstreams are the kings of case fans / low restriction as of now - but that's only a specific use condition. I can vouch also for the 800rpm slipstream: it's really an excellent product, and a silver bullet for building low noise PCs.
On the other hand, the 1000 and 2000 rpm Ultra Kazes, when on a fan controller (or a motherboard plug that supports speed setting) are now the kings for watercooling and other high impedance radiators. The 1000rpm model becomes really quiet at 800rpm and still pushes a lot of air.
Different, specific products for specific uses: that's how it should be done :) (Scythe are the first to really try and do it with PC cooling in mind)


Top
 Profile  
 
 Post subject: Power first silence second!
PostPosted: Thu May 08, 2008 11:46 pm 
Offline

Joined: Thu Jan 18, 2007 10:31 pm
Posts: 305
Location: Japan
When these "Slipstream" models first hit the market, they looked very promising and I snatched up 4 "SH - 1900RPM" models. I also picked up a 4 way controller that could vary the output to the fans from 7V-12V.

Since I started using them, I've almost always left them at 7V and couldn't be happier! I only crank them up for serious CFM durning heavy overclocking/benching sessions where I can run over 4.0GHz on air!(my team at OCForums just won the 2008 Winter Warz! :P ) While I almost picked up the 1600RPM versions instead thinking the 1900RPM models would be overkill, after seeing your article, I know I made the right choice!

But the best part is not at 12V...it's when they're almost silent at 7V. These fans are awesome! 8)

_________________
The 3-Step Overclocking Guides: Sandy Bridge || Bloomfield & Gulftown || Lynnfield || Clarkdale


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 1:11 am 
Offline
*Lifetime Patron*

Joined: Sat Jan 18, 2003 2:19 pm
Posts: 5316
Location: St Louis (county) Missouri USA
My last Ninja did come with a Slip-Stream 1200, so I can vouch for it's qualities. What I find interesting and difficult to understand.....the large differences between the Slip-Stream 1200 and 1600 models. I've never heard the 1600, so I can only go by your testing. I'm particularly at a loss to figure the almost 300 rpm difference at low voltages, and the much lower start-up voltage difference between the two.

It almost seems these two fans are completely different models......that look exactly the same on the outside. I wonder could they be made by completely different companies? Any guesses exactly who is making fans for Scythe?

Next question..... life-span differences between the Slip-Stream and the S-Flex. All my projects seem to end up with horizontal-mounted fans. For that reason the S-Flex should be the better choice....on paper anyway. But I've never heard anything specifically bad about mounting a Slip-Stream horizontal. My Slip-Stream 1200 is mounted horizontal.....without any issues so far. :?

Nice set of tests.....looks like the Slip-Stream 1200 should become your "reference" fan. :)

_________________
"At the core of liberalism is the spoiled child - miserable, as all spoiled children are, unsatisfied, demanding, ill disciplined, despotic, and useless. Liberalism is the philosophy of sniveling brats." - P.J. O'Rourke


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 3:49 am 
Offline

Joined: Tue Apr 15, 2008 12:36 pm
Posts: 116
Location: London
wont the slipstreams just mount on the xigmatek with the rubber mounts they provide?


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 6:05 am 
Offline
SPCR Reviewer

Joined: Sat Nov 23, 2002 6:33 am
Posts: 8636
Location: Sunny SoCal
Fallsroad wrote:
MikeC wrote:
Fallsroad wrote:
Great review!

Anyone have any tips on modding the corners of the DFS122512L-PWM so it can be mounted on a Xigmatech S-1283?

Just take a hack saw to the corners. Plastic cuts easy. I've done this in the past by making two cuts at each corner, each cut just below the lip... then taking a sturdy pair of pliers and squeezing the unwanted portion of the corner. It takes some pressure, then the corner get's crushed, leaving clean edges as a result of the cuts. If you can visualize what I'm saying, try it maybe with an old fan. If not, don't do it, and don't blame me! :lol:


Hm.

I'm trying to visualize it, and admit I'm not quite getting it.


Handy-dandy Fan Corner Cutting Guide that's been stickied in the "Fans" forums for a few years now. Illustrated with color pictures!

_________________
Main Box: Intel i3-3225, Intel DH77EB, 16GB Corsair RAM, 256GB Samsung 830, SS360GP PSU, CM PS07 case.
Music Server: Intel DH77EB + i3-3220, 2xSamsung 2TB F4, Pico PSU, Fractal Define Mini, 2xScythe Fans @250 rpm.


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 6:24 am 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
Ralf Hutter wrote:
Handy-dandy Fan Corner Cutting Guide that's been stickied in the "Fans" forums for a few years now. Illustrated with color pictures!

Thanks RH, you're the best! 8)

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 7:56 am 
Offline

Joined: Fri Mar 14, 2008 5:18 am
Posts: 490
Location: London, UK
One question: How many fans did you test per fan-type?


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 8:05 am 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
Cistron wrote:
One question: How many fans did you test per fan-type?

The number of samples is listed in the green portion of the data box for each model. The number varied, from one for a few to 6 for some. When there were many samples, not all were checked -- after you've checked a few and they all sound the same, we accept that's the norm. If you find one that's noisier, it's the exception, and we think it's most often shipping-related damage. No one else probably even notices because no one else tests at as wide a range of speeds as we do under such an acoustic microscope. Variances were noted -- in the data box and discussed in the text.

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 8:17 am 
Offline

Joined: Fri Mar 14, 2008 5:18 am
Posts: 490
Location: London, UK
MikeC wrote:
Cistron wrote:
One question: How many fans did you test per fan-type?

The number of samples is listed in the green portion of the data box for each model. The number varied, from one for a few to 6 for some. When there were many samples, not all were checked -- after you've checked a few and they all sound the same, we accept that's the norm. If you find one that's noisier, it's the exception, and we think it's most often shipping-related damage. No one else probably even notices because no one else tests at as wide a range of speeds as we do under such an acoustic microscope. Variances were noted -- in the data box and discussed in the text.
Thanks, must have overlooked that part of the box. Your observation is quite surprising to me. I always assumed the differences between individual fans would be bigger, especially when one looks at the quite big standard deviations the manufacturers quote for example for fan speed.

Great test, although the scientist in me always wants to do statistical analysis on almost everything. :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 8:32 am 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
Cistron wrote:
Thanks, must have overlooked that part of the box. Your observation is quite surprising to me. I always assumed the differences between individual fans would be bigger, especially when one looks at the quite big standard deviations the manufacturers quote for example for fan speed.

Great test, although the scientist in me always wants to do statistical analysis on almost everything. :lol:

This is not to say there are NO differences at all, all we're saying is that there weren't any differences that were significant acoustically. Fan speed deviation really refers to the volts-to-rpm relationship. Some might require higher voltage to get to 1000rpm or maybe less voltage -- but does this matter in our context? No, not really. We assume, I think correctly, that most people studying these articles in detail will have and will want to have fan controllers... and they're mostly tuning the speed by ear, with an eye on the temp monitor. The relationship between rpm (or CFM) and noise is what we're more atuned to in our tests.

I keep yearning for meaningful stat. analysis too but I'd have to organize an enterprise like CSA or UL to pull that off successfully... no thanks! :lol:

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 8:43 am 
Offline

Joined: Sat Apr 12, 2008 5:05 pm
Posts: 160
Location: Orangevale, CA
Thanks for an excellent article.

I would like to see more consideration given to fluid bearings, such as found in the Noctua, Panaflo, Scythe, and Evercool.

One data point often missing from the fan comparisons is Static Head Pressure. I've requested this information from Scythe and Evercool, as neither publishes their data. This is helpful when researching fans suitable for high impedance loads.


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 9:09 am 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
bgavin wrote:
Thanks for an excellent article.

I would like to see more consideration given to fluid bearings, such as found in the Noctua, Panaflo, Scythe, and Evercool.

One data point often missing from the fan comparisons is Static Head Pressure. I've requested this information from Scythe and Evercool, as neither publishes their data. This is helpful when researching fans suitable for high impedance loads.

When you come right down to it, all we can say about the bearings is whatever the company tells us about them. We do discuss bearings at length in the Anatomy of the Silent Fan article linked in the review. The only way to know more is to do long term statistical analysis with large numbers of samples under a variety of controlled conditions -- something few enterprises have the resources or interest to pull off.

As for pressure, this is another very difficult thing to measure consistently. We have enough trouble with CFM without adding pressure to the mix. The simple rule of thumb is that given the same size (120x120x25) and number of blades, pressure is directly tied to rpm -- it doesn't vary much other than with rotational speed. I don't really know what happens with a higher number of blades. I do know that to make any significant increase in pressure, you need to increase the depth of the fan, which allows for each blade to be a bigger "scoop". Hence the 38mm depth of the Ultra Kaze fans.

In future we may just add something like a high impedance heatsink up against each fan and repeat the airflow measurements -- this will give us some idea about pressure.

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 9:16 am 
Offline
SPCR Reviewer

Joined: Sat Nov 23, 2002 6:33 am
Posts: 8636
Location: Sunny SoCal
MikeC wrote:
Ralf Hutter wrote:
Handy-dandy Fan Corner Cutting Guide that's been stickied in the "Fans" forums for a few years now. Illustrated with color pictures!

Thanks RH, you're the best! 8)


Please remember this when it comes time for this year's annual performance evaluation/raise!

_________________
Main Box: Intel i3-3225, Intel DH77EB, 16GB Corsair RAM, 256GB Samsung 830, SS360GP PSU, CM PS07 case.
Music Server: Intel DH77EB + i3-3220, 2xSamsung 2TB F4, Pico PSU, Fractal Define Mini, 2xScythe Fans @250 rpm.


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 10:19 am 
Offline

Joined: Tue Sep 20, 2005 6:55 am
Posts: 5085
Location: UK
Quote:
One data point often missing from the fan comparisons is Static Head Pressure. I've requested this information from Scythe and Evercool, as neither publishes their data. This is helpful when researching fans suitable for high impedance loads.


one or two points to bear in mind:
a) even the best axial fans really aren't capable of producing much of a pressure rise. for that you need centrifugal (squirrel cage) fans.
b) given a), the best approach is often to reduce the impedance/backpressure that the fan has to face (ie by prudent selection of heatsinks etc) in order to reduce the overall system impedance.

Quote:
MikeC@I don't really know what happens with a higher number of blades.


in theory more blades = better pressure capability, but again see point a) above.

_________________
JFK:
What do our opponents mean when they apply to us the label "Liberal?" If by "Liberal" they mean...someone who looks ahead, who welcomes new ideas without rigid reactions,who cares about the welfare of the people, who believes we can break through the stalemate and suspicions that grip us in our policies abroad...then I'm proud to say I'm a "Liberal."


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 11:45 am 
Offline
SPCR News Editor

Joined: Thu Feb 10, 2005 11:20 am
Posts: 2174
Location: TN, USA
Great article. You know I love the comparison table on page 6 :D

It's interesting to see the comparisons at other noise levels. For example at 21 dBA (near the noise level of a 12v Nexus which does 29 CFM in similar testing) you get
Code:
Slipstream SH 1900  7V  18dBA  630RPM 21CFM
Slipstream  H 1600  5V  21dBA  890RPM 30CFM
Slipstream  M 1200  7V  21dBA  890RPM 30CFM
Slipstream  L  800 12V  19dBA  770RPM 24CFM
Slipstream SL  500 12V <18dBA  440RPM 14CFM


The significance of that to me is that a L 800 is quieter than a nexus but doesn't keep up in the airflow dept. You need a M 1200 or H 1600 to give you the top airflow of a Nexus 120mm at 12v and either does so at about 1-2 dBA less noise! Only the M 1200 can also give you the lower dBAs to compete with the Nexus in a wider range below 20 dBA.

I'd definitely like to see the Slipstream M 1200 RPM model be the new reference fan. Especially if that means we start seeing heatsinks tested at 28 and 24 dBA in addition to the already very quiet levels the old tests are done at. This would bring heat sink testing in line with the comparison charts on PSUs reviews where you color the dBA below 30 differently than above 30 dBA. Besides CPU heat sinks are usually central to the case so the noise is less of an issue compared to an intake or exhaust fan.

28 dBA at 12v
24 dBA at 9v
21 dBA at 7v
18 dBA at 5v
<18 dBA at 4v

It's a nearly perfect 3 dBA progression at the 4 major voltages you normally test at. Whereas the Nexus is

22/23 at 12v
19 at 9v
<19 at 7v
<19 at 5v

Which doesn't give much of a range in dBA for testing heat sinks. Though it does at test lower CFM situations more thoroughly. The counter to that is easy though, just add 4v to the testing since the Slipstream M 1200 handles it well and add fanless testing if the HS can handle it and let us read between the lines.

Code:
Number of samples tested: 4
Nexus D12SL-12     12V  22dBA 1080RPM 29CFM
Nexus D12SL-12      9V  19dBA  850RPM 23CFM
Nexus D12SL-12      7V <19dBA  680RPM 19CFM
Nexus D12SL-12      5V <19dBA  490RPM 13CFM
Starting Voltage 5.5V

Code:
Number of samples tested: 4
Slipstream  M 1200 12V  28dBA 1210RPM 46CFM
Slipstream  M 1200  9V  24dBA 1030RPM 37CFM
Slipstream  M 1200  7V  21dBA  890RPM 30CFM
Slipstream  M 1200  5V  18dBA  720RPM 24CFM
Slipstream  M 1200  4V <18dBA  620RPM 20CFM
Starting voltage 2.4

_________________
.
Please put a country in your profile if you haven't already.
This site is international but I'll assume you are in the US if you don't tell me otherwise.
RAID levels thread http://www.silentpcreview.com/forums/viewtopic.php?p=388987


Last edited by dhanson865 on Fri May 09, 2008 11:59 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 11:51 am 
Offline
Site Admin

Joined: Sun Aug 11, 2002 3:26 pm
Posts: 11830
Location: Vancouver, BC, Canada
dhanson865 wrote:
Great article. You know I love the comparison table on page 6 :D

I'd definitely like to see the Slipstream M 1200 RPM model be the new reference fan........

Interesting suggestion, will definitely be considered -- probably after the anechoic chamber & new audio test gear is implemented.

_________________
Mike Chin,
Editor/Publisher, SPCR
Support SPCR with your donations!


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 1:27 pm 
Offline

Joined: Sun May 04, 2008 7:51 pm
Posts: 69
Location: Tulsa, OK
Ralf Hutter wrote:

Handy-dandy Fan Corner Cutting Guide that's been stickied in the "Fans" forums for a few years now. Illustrated with color pictures!


I've been reading the site for years, but just recently ventured into the forums.

Thanks for the link - I'm off to buy a hacksaw and do some damage. :)


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 1:36 pm 
Offline

Joined: Sun May 04, 2008 7:51 pm
Posts: 69
Location: Tulsa, OK
Ash wrote:
wont the slipstreams just mount on the xigmatek with the rubber mounts they provide?


The Slipstreams will, but not the PWM version. The corners are closed so there is no way to pull the rubber mount through, nor anyplace for it to "get a grip" on the frame of the fan. That's why it would have to be cut first.

Click on the photos of the PWM fan and you can see the tube of plastic connecting the front and back holes in the frame.

http://www.frozencpu.com/products/6096/ ... L-PWM.html


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 09, 2008 2:02 pm 
Offline

Joined: Tue Apr 15, 2008 12:36 pm
Posts: 116
Location: London
oh right, sorry my bad, didnt know you where referring to the pwm.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 73 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group