SPCR
http://www.silentpcreview.com/forums/

Akasa Galileo Ultra-slim Fanless Thin ITX Case
http://www.silentpcreview.com/forums/viewtopic.php?f=13&t=66462
Page 1 of 1

Author:  Lawrence Lee [ Fri Aug 16, 2013 9:00 pm ]
Post subject:  Akasa Galileo Ultra-slim Fanless Thin ITX Case

http://www.silentpcreview.com/Akasa_Galileo/

Author:  CA_Steve [ Sat Aug 17, 2013 6:37 am ]
Post subject:  Re: Akasa Galileo Ultra-slim Fanless Thin ITX Case

Neat case. Probably more suitable to Haswell's dual cores :) I found a couple of things...

p3, 5th caption: "As they are located underneath the baseplate, there isn't a lot of pressure being applied. As the bracket is tightened, the metal frame pulls away, leaving a gap."

I didn't understand this.

p4. Links

System Config:
- The Mushkin link ain't going to Mushkin :)
- The Win7 page goes to a Win8 page.

Measurement and Analysis Tools (also occurs in Argon Cooler article)

- The CPU-Z link goes to Panopsys PC Health Advisor?! Better link: http://www.cpuid.com/softwares/cpu-z.html
- Prime95 goes to a dead page. Better link: http://www.mersenne.org/freesoft/

Author:  MikeC [ Sun Aug 18, 2013 7:58 pm ]
Post subject:  Re: Akasa Galileo Ultra-slim Fanless Thin ITX Case

CA_Steve wrote:
Neat case. Probably more suitable to Haswell's dual cores :) I found a couple of things...

p3, 5th caption: "As they are located underneath the baseplate, there isn't a lot of pressure being applied. As the bracket is tightened, the metal frame pulls away, leaving a gap."

I didn't understand this.

Reworded. It should make a bit more sense now. Look carefully at the pic.

CA_Steve wrote:
p4. Links

System Config:
- The Mushkin link ain't going to Mushkin :)
- The Win7 page goes to a Win8 page.

Measurement and Analysis Tools (also occurs in Argon Cooler article)

- The CPU-Z link goes to Panopsys PC Health Advisor?! Better link: http://www.cpuid.com/softwares/cpu-z.html
- Prime95 goes to a dead page. Better link: http://www.mersenne.org/freesoft/

Larry, please correct.

Author:  CA_Steve [ Sun Aug 18, 2013 8:04 pm ]
Post subject:  Re: Akasa Galileo Ultra-slim Fanless Thin ITX Case

Quote:
Reworded. It should make a bit more sense now. Look carefully at the pic.


Thanks!

Author:  Lawrence Lee [ Mon Aug 19, 2013 10:16 am ]
Post subject:  Re: Akasa Galileo Ultra-slim Fanless Thin ITX Case

All good now. Thanks, Steve.

Author:  Spoon Boy [ Wed Aug 21, 2013 3:23 am ]
Post subject:  Re: Akasa Galileo Ultra-slim Fanless Thin ITX Case

Is it just me that thinks it odd that the heatblock has four slots for heatpipes, but the heatsink portion only has two slots. Wont the empty holes in the heatblock cause problems with thermal conductivity ? And would the anodized finish on the heatpipe grooves also reduce thermal conductivity ?
Why not have the heatsink portion at the front of the case, this way it would take up less width but at the cost of making it deeper, im guessing more people have spare room going from front to back than width ways.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/