Well, it's better than the default one.
Antec SLK3700 BQE
Antec SL350S with fan swapped for a Titan (aka Evercool; not the aluminium one though) 80mm @ 7V
Asus A7N8X-E Deluxe
AMD Athlon XP Barton 2500+ @ 3200+
Spire "WhisperRock" IV @ Uhm, dunno, but I guess about 9V - 10V. It's at ~1950 RPM anyway.
512MB PC3200 DDR-SDRAM
Geforce2 Pro 64MB with Zalman ZM-NB47J
Seagate Barracuda IV 80GB & 60GB
Seagate Barracuda 7200.7 S-ATA 80GB
Zalman ZM-F2 92mm @ 7V
I'll probably swap the WhisperRock IV for a Zalman CNPS7000A-AlCu, but other than that I'm pretty satisfied with this setup.
The case is lined with two materials, this
and the 10mm version of this
I'm a crappy photographer; sorry about the dark pics. :/
Click on the pictures to view the full-size version.
Overview pic. My "temporary" (it's been this way for over a month
) HDD suspension can be seen in the lower right corner.
A cloe-up of the top part of the case.
This was supposed to show the way I routed my fan cables, but I messed it up; I thought I'd post it anyway since it shows off the egg-crate foam pretty good.
Right side. The fan cable coming from the PSU can be seen in the upper right corner.
Front and backside. Duh.