It is currently Tue Oct 21, 2014 9:19 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: P4 2.8C@3.5ghz in an Antec Sonata Case
PostPosted: Sun Jun 20, 2004 6:12 pm 
Offline

Joined: Sun Jun 20, 2004 5:13 pm
Posts: 1
My current set up is a:

P4 2.8C@3.26ghz (233 fsb)
Asus P4p800 deluxe
1 Gig of HyperX PC4000 @ 466mhz
GF4 4600 128mb (yes i know its old)
Antec Sonata Case with stock single 120mm cooling
WD 10,000 RPM 36GB 8mb raptor
WD 7,200 RPM 250GB 8mb

I want to run at 2.8C@3.5 to take full advantage of my ram.

However i am afraid to run at this temp, and would like to put beter cooling in my case.

I am considering:

One or two Panaflow L1 120mm
One or two Vantec Stealth 120mm
One or two Vantec Thermoflow 120mm
One or two Papst 120mm
One or two Evercool 120mm
One or two Stock Antec 120mm

I'm not sure if i should get two or one of each of these and what voltage i should run them at 12, 7, or 5.

I know this is a popular overclock and set up, so i was looking with for people running at 3.5 in antec sonata cases to share their set ups, or any advice on the subject.

Basically i want it to be cool, and fairly quiet (doesn't have to be silent)

My last computer 1.6A@2.72ghz had 7 80mm sunons (inlcuding the cpuand PS fans) so preferably a lot quieter than it

_________________
P4 2.8C@3.26ghz (233fsb)
Asus P4p800 deluxe
1 gig of kingston HyperX PC4000ram @DDR466
Antec Sonata Case


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group