Quiet P4 setup, modded heatpipe and a REALLY big heatsink
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 271
- Joined: Thu Jun 24, 2004 3:19 pm
Quiet P4 setup, modded heatpipe and a REALLY big heatsink
Initial mesh metal cut for the sides...
...
Bolts that hold everything together...
...
PLaying with spacing...
...
A SERIOUSLY cut up thermaltake silent tower. Man that thing had a lot of fins. Surprisingly the fins were not brazed and where not soldered. Just slid down ontop of the 6 heatpipes. I just took a flat head screwdriver to jimmy one lose then I could pull it off with my fingers. Took awhile but did no damage to the heatpipes...
...
Heatpipes after being bent and marking the heatsink for mounts...
...
Mounting holes made and initial brackets. I just cut up the fins I ripped off the heatsink to make the brackets.
...
Checking positioning. Its not show in the pic but I had to make another mounting backet as I couldnt get the stock one to work with the way I wanted the heatpipes oriented:
...
Mostly assembled and running...
...
Pretty much finished pics:
...
Need to get a new PS (hopefully will fix my HT'ing probs) and will add a DVD/cd-rw laptop drive
Had to take down pics. Got a PM saying 56k'ers were complaining. No one on other forums complained and I don thave time to resize and reupload all the pics, sorry. Im redoing the mounting on this PC when I finish my HTPC (which I'll post pics also) so I'll post final (and yes smaller) pics then. Probably mid-Nov. Think its kool a lot of people were looking though Thanks for the compliments everyone.
...
Bolts that hold everything together...
...
PLaying with spacing...
...
A SERIOUSLY cut up thermaltake silent tower. Man that thing had a lot of fins. Surprisingly the fins were not brazed and where not soldered. Just slid down ontop of the 6 heatpipes. I just took a flat head screwdriver to jimmy one lose then I could pull it off with my fingers. Took awhile but did no damage to the heatpipes...
...
Heatpipes after being bent and marking the heatsink for mounts...
...
Mounting holes made and initial brackets. I just cut up the fins I ripped off the heatsink to make the brackets.
...
Checking positioning. Its not show in the pic but I had to make another mounting backet as I couldnt get the stock one to work with the way I wanted the heatpipes oriented:
...
Mostly assembled and running...
...
Pretty much finished pics:
...
Need to get a new PS (hopefully will fix my HT'ing probs) and will add a DVD/cd-rw laptop drive
Had to take down pics. Got a PM saying 56k'ers were complaining. No one on other forums complained and I don thave time to resize and reupload all the pics, sorry. Im redoing the mounting on this PC when I finish my HTPC (which I'll post pics also) so I'll post final (and yes smaller) pics then. Probably mid-Nov. Think its kool a lot of people were looking though Thanks for the compliments everyone.
Last edited by jamesavery22 on Wed Oct 27, 2004 12:27 pm, edited 1 time in total.
-
- *Lifetime Patron*
- Posts: 1288
- Joined: Sat Oct 25, 2003 3:21 pm
- Location: 15143, USA
- Contact:
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
I've said it before, and I'll say it again: That's what I don't get about the people that are looking to passively cool a 50W+ CPU and system that resides in a typical ATX case. You're still going to need at least one or two fans to keep a bit of airflow going, unless perhaps you're running w/o a case or in some sort of non-standard configuration. And if you have a couple of even super quiet fans, why not add another to the CPU? You'll end up with infinitely better cooling with no noticeable increase in noise.PhilgB wrote:
Good work, but it seems like a total waste with all those fans on it...
Well I'm impressed by your efforts, and that heatsink looks great! However I have to agree with Ralf and others... What exactly are you trying to achieve? It doesn't look like silence is a high priority; you could have a quieter setup with much less effort. On the other hand, it probably wouldn't take much to turn your system into a quiet rig. What are the temps with those two larger fans switched off? I bet that little fan on your PSU whines a bit...
-
- Posts: 271
- Joined: Thu Jun 24, 2004 3:19 pm
My goal was noise. THe two fans on there are 92mm FBA09A12V Panaflos. They arent the "quiet" fans, they are literally dead silent. If I turn off the PSU fan I can only hear the fans if Im under 3 feet away and even then they are a very slight hum. They are very very weak fans, they are the speed control ones, I have no input for the 3rd pin so they spin at 1000rpm. But they put enough of a breeze over the heatsink to keep temps down.
my ambient in my room varies from 23-27c. My temps vary between 43c-47c. I tried to run it passively but temps got over 60c and kept rising, just not confortable with that. Thats full load. I dont care about idle, box is running FaD 24/7.
I need to replace the PS, its too loud and its too weak. Just dont have time right now. As someone already said its REAL PITA to work with. Didnt make it to be modular, just a quiet router,mailserver,FaD box to throw in a corner. I also need to buy a slim laptop cdrom. Just dont have the time...
my ambient in my room varies from 23-27c. My temps vary between 43c-47c. I tried to run it passively but temps got over 60c and kept rising, just not confortable with that. Thats full load. I dont care about idle, box is running FaD 24/7.
I need to replace the PS, its too loud and its too weak. Just dont have time right now. As someone already said its REAL PITA to work with. Didnt make it to be modular, just a quiet router,mailserver,FaD box to throw in a corner. I also need to buy a slim laptop cdrom. Just dont have the time...
-
- Posts: 271
- Joined: Thu Jun 24, 2004 3:19 pm
Not really sure what you mean... The base of the heatpipes are just the base of the thermal take silent tower. I left that intact. The heatpipes were about 120mm long on each side. So there are 3 240mm long heatpipes folded in half at the base.Straker wrote:Those are pretty nice temps for basically just heatpipes on the CPU. Any chance you have any pics of the CPU (like, what you have the heatpipes attached to on that end)? How long are those pipes?
...
That shows the base.
The heatpipes are screwed to the base which is all covered in Artic Silver Ceramique. The heatpipes transfer plenty of heat to the heatsink, hence why a breeze over it keeps it at those temps...
Last edited by jamesavery22 on Wed Oct 27, 2004 12:28 pm, edited 1 time in total.
-
- Posts: 1283
- Joined: Wed Sep 03, 2003 1:35 am
- Location: Sweden, Linkoping
-
- Posts: 271
- Joined: Thu Jun 24, 2004 3:19 pm