a few builds......

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Zargon
Posts: 77
Joined: Sat Feb 20, 2010 9:00 am
Location: Urbana, IL

a few builds......

Post by Zargon » Fri May 13, 2011 8:38 am

Reaumur(Gamer) 130w Idle :( :
Silverstone Raven02, XFX650W PSU, Intel Core i5-2500K, Thermaltake FRIO
Gigabyte P67-UD4, 8GB GSkill Ripjaw DDR3-1333 CL7
2 x Sapphire 5870's, 96GB Kingston V+100 SSD, 1TB WD Caviar Black Sata II model, Lite On DVD Drive.
the top 120 and the CPU HSF Fans were replaced with Scythe SY-1225SL12L SlipStreams
I've done some cabling work, boughta few NZXT cables for it

I had 2x30gb vertexs in raid 0, but swapped to the kingston when my B3 board came in. also got some new cabling then, might not have uploaded the up to date photos

Pics:
Image
Image
Image
Image
Image
Image
Image
Image


I'll find the most up to date ones, must be on a PC at home

Zargon
Posts: 77
Joined: Sat Feb 20, 2010 9:00 am
Location: Urbana, IL

Re: a few builds......

Post by Zargon » Fri May 13, 2011 8:51 am

Kelvin(3D-HTPC):Q9550 w/H50, P5G41T-M/CSM, 4GB Patriot DDR2-1066, XFX 6950 reference, 1TB Caviar Black, 1TB Caviar Green, Antec TruPower Trio 650. Fans are cooler masters, and a 80mm SilenX(PWN controlled).

This is in my living room, its not that quiet obviously, I mostly wanted to use that case, and migrated out of a P180. Its pretty quiet just sitting there, mostly here the Cav black clicking more than anything.

Pics:
Image
Image
Image
Image
Image
Image
Image
Image
Image

I have a blu-ray drive to install, when I do that I will get out the velcro, zip ties, and cable tubing and have some more fun.

but not till after I mess with Reaumur my raven rig(first post) and get it stable again, got an RMA for the ram, when they run in dual channel I get lots of crashes :(

Post Reply