Not quite, but I think noise and temperatures would be about the same if you mount one exhaust fan at the back and one at the top.
However, there might be a problem with the power supply. AnandTech speaks better english than me, so I will let them explain the issue:
Our testbed power supply is 160mm, but the modular connectors make it impossible to actually fit inside the power supply bay, and I suspect even a non-modular 160mm PSU would be a tight fit at best. As a result I wound up re-using the SFX power supply from the SilverStone FT03 Mini with an adapter plate, and the much smaller power supply made cabling worlds easier. I feel like if anything about the Prodigy is going to hang up end users, this will be it, so buyer beware: if you're planning a build in this case, get a 140mm power supply. Honestly even going the route I did and using an SFX power supply with an adaptor couldn't be a bad idea.
Picture from LegitReviews:
Fractal Node 304 has a similar problem. This was the main reason I ended up with the Corsair case.