I googled a lot to find out if Antec P182 cabinet will support a SSI CEB sized (12inch x 10.5inch) motherboard, but in vain.
I will be greatful if any member can throw some light. I specifically want to fit Asus DSAN-DX motherboard in Antec P182 cabinet. The product page of the motherboard can be found here:-
http://www.asus.com/products.aspx?model ... 3=299&l4=0
Antec P182 SSI CEB (12inch x 10.5inch) Motherboard Support
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
I've just measured mine, and it's eleven inches from the PCI slot covers and I/O plate to the back of the drive cages (which are all in a straight line), so it should fit... just.
You might have one or two problems though - I'm not sure if you could fit large aftermarket heatsinks given the position of the CPU sockets, and cable management will inevitably be a bit tiresome. Your mobo's ATX connector is in an unusual position, so you'd need to make sure your PSU's main power cable was long enough to stretch right up to the top of the board.
You might have one or two problems though - I'm not sure if you could fit large aftermarket heatsinks given the position of the CPU sockets, and cable management will inevitably be a bit tiresome. Your mobo's ATX connector is in an unusual position, so you'd need to make sure your PSU's main power cable was long enough to stretch right up to the top of the board.