Antec Skeleton... and P183 & Sonata Elite
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
Read on 2 sites now that the p183 and p193have been officially introduced.
http://tweakers.net/nieuws/59364/antec- ... n-uit.html (dutch site) mentions it is supposed to be for sale with immediate effect, with the P183 costing €161 and the P193 €190. Haven't seen it for sale in shops yet though..
http://tweakers.net/nieuws/59364/antec- ... n-uit.html (dutch site) mentions it is supposed to be for sale with immediate effect, with the P183 costing €161 and the P193 €190. Haven't seen it for sale in shops yet though..
i was expecting it to be a bit more quiet (they could have changed the fans with quieter ones) , because my old no name case was much more than this. and i don't think those air filter really do their job well because are to wide.the metal grill from front is is very ugly,has to be removed.don't know why they put the key to the door because the reset and power button can be accessed without opening the door thru the holes.
-
- Posts: 580
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: USA (Phoenix, AZ)
-
- Posts: 107
- Joined: Sat Apr 15, 2006 9:59 pm
- Location: California
So that it can fit the CP-850?
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Of course.alphabetbackward wrote:So that it can fit the CP-850?
Easy enough to use the CP-850 in a P180/2 -- just remove the little platform. All that takes is a pulling a couple of rivets. Since the case back panel is mostly vented, it will be easy to line some screw mounting holes. Or go all the way and enlarge the exhaust hole on the back panel of the case.
Will be testing a CP-850 very soon, you'll know soon enough whether that PSU is worth doing any such mods to the earlier 180 series cases.