Page 1 of 1
Does anyone make fan vent covers?
Posted: Wed Aug 01, 2012 7:56 am
by JJ
I'm building a file server in an older Cooler Master RC-590 case. The case has two top fan openings, two door fan openings, and even a fan opening in the door behind the motherboard tray.
I want to cover these fan vents. I can use duct tape or something similar, but would like to find something neater. Does anyone make vent covers that are mounted using screws?
Re: Does anyone make fan vent covers?
Posted: Wed Aug 01, 2012 8:06 am
by kuzzia
Probably not. But instead of only using tape, you could tape some material on the fan openings. For example black cardboard, black paper or black clothes.
Re: Does anyone make fan vent covers?
Posted: Wed Aug 01, 2012 6:44 pm
by flemeister
Re: Does anyone make fan vent covers?
Posted: Wed Aug 01, 2012 8:04 pm
by ces
Get two of these, and bolt them onto the two gratings:
http://www.performance-pcs.com/catalog/ ... s_id=30036
But in between the filter and the grating, place some black plastic or paper that you have cut out into a 120mm circle.
These might work as well:
http://www.performance-pcs.com/catalog/ ... ts_id=2334
And these you can use without even bothering with bolts:
http://www.performance-pcs.com/catalog/ ... s_id=25552
Re: Does anyone make fan vent covers?
Posted: Wed Aug 01, 2012 8:58 pm
by starsky
or you could just attach some sound dampening foam with double sided tape.
Re: Does anyone make fan vent covers?
Posted: Thu Aug 02, 2012 4:01 am
by ces
starsky wrote:or you could just attach some sound dampening foam with double sided tape.
Some foams come with the sticky already attached, see:
viewtopic.php?p=539399#p539399
Though I am not so certain how easy it is to remove such foam once you have applied it.
Re: Does anyone make fan vent covers?
Posted: Sun Aug 05, 2012 1:32 am
by Das_Saunamies
Haven't seen vent covers, even in enthusiast shops, so I think it'll have to be DIY. I dislike tape, as it is often a messy solution.
If there is a place that sells industrial supplies nearby, they might have suitable plastic on sale. The modding classic of a PMMA ("plexiglas") side window could well be applied to a smaller scale here: cut pieces, drill or screw holes, attach, done. Might even get a nice transparent effect to boot!
Re: Does anyone make fan vent covers?
Posted: Sun Aug 05, 2012 2:30 am
by Luke M
Re: Does anyone make fan vent covers?
Posted: Sun Aug 05, 2012 2:45 am
by Das_Saunamies
Thanks, now I feel embarassed; why did I search for "fan cover" when it's obviously a "fan mount cover". First hit is the Puget.
Re: Does anyone make fan vent covers?
Posted: Mon Aug 06, 2012 7:37 am
by Just an ordinary rabbit
I have the same case, I've swapped the side panels round (so that the two large openings are against the motherboard tray). I just used duct tape to cover the other openings - it works fine and hasn't fallen off like I thought it might.
Re: Does anyone make fan vent covers?
Posted: Fri Aug 10, 2012 8:39 pm
by kellym2