What size case do I need?
Posted: Tue Dec 31, 2013 9:33 am
Hi All
I have (finally) been purchasing some new parts to build a new machine going for the following:
CPU 2 x Xeon X5660
MB Supermicro X8DTL-6F
RAM 4 x SAMSUNG 8GB REG ECC MEMORY
I have yet to finalise all parts but its looking like:
GPU AMD FirePRO v4900
2 x Supermicro SNK-P0040AP4 Heatsinks
Seasonic Platinum Series PSU (model / wattage tbc)
Asus PCE-AC68 Wireless card
ORICO PFU3-2O2I USB3 Card
plus a reuse of assorted HDD and SDD using the onboard and additional PCI-e SAS2008 card.
Now I am looking for advise on which case to buy.
I would like to get the Antec P183 V3 however I am not entirely sure it will fit.
The Supermicro website says it is ATX however the manual says it is EATX.
12.00" (L) x 10.00" (W)
or
304.80mm (L) x 254.20mm (W)
Is any one able to confirm compatibility ? or is a P280 required ?
I have (finally) been purchasing some new parts to build a new machine going for the following:
CPU 2 x Xeon X5660
MB Supermicro X8DTL-6F
RAM 4 x SAMSUNG 8GB REG ECC MEMORY
I have yet to finalise all parts but its looking like:
GPU AMD FirePRO v4900
2 x Supermicro SNK-P0040AP4 Heatsinks
Seasonic Platinum Series PSU (model / wattage tbc)
Asus PCE-AC68 Wireless card
ORICO PFU3-2O2I USB3 Card
plus a reuse of assorted HDD and SDD using the onboard and additional PCI-e SAS2008 card.
Now I am looking for advise on which case to buy.
I would like to get the Antec P183 V3 however I am not entirely sure it will fit.
The Supermicro website says it is ATX however the manual says it is EATX.
12.00" (L) x 10.00" (W)
or
304.80mm (L) x 254.20mm (W)
Is any one able to confirm compatibility ? or is a P280 required ?