Hi,
This is my first post on SPCR. I've decided I need a new PC, and this seems to be the best place to get advice; I know what kind of 'core' hardware I need, but silencing is another matter.
I work as a 3D artist and compositor at an animation studio at the moment, which means I have Dell and HP workstations whirring away around me all day, every day.
When I get home I want something that's as silent as possible - but I can't get away from the fact that I need as much CPU and GPU as I can afford, since my setup will be used for both 3D work and gaming. And liquid cooling sounds (no pun intended) too complicated and expensive... So I guess I will have to put up with some noise, my goal is therefore to build as quiet as I can.
Here's what i've planned so far:
CASE: Antec P193 (lots of space for stuff i might need later, lots of air, good reviews)
PSU: Antec CP-850 (excellent reviews on SPCR, lots of juice)
CPU: Intel i7 p920 or 950 (the more, the merrier)
RAM: 8-12 GB (not decided on the brand)
GPU: 1x GeForce GTX 275 (for now)
STORAGE: Might start out with a cheap drive, might upgrade to some kind of RAID setup later
MAINBOARD: Not really decided
So, my question is: how can I silence this thing as much as possible?
Newcomer: Quiet Professional 3D and casual gamer rig
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 1
- Joined: Tue Oct 13, 2009 11:54 pm
- Location: Oslo, Norway
Hi,
Welcome to SPCR
Get a large CPU cooler (ninja or something along those lines), a bunch of fans from the recommended list and that will be a good start.
As for the GPU, why not go for a new ATI one (58xx) ? They seem to have low power comsumption at idle (i.e. easy to cool) and are quite powerfull.
Also, check out aftermarket GPU coolers. The Accelero is popular around here (check compatibility with your card).
Welcome to SPCR
Get a large CPU cooler (ninja or something along those lines), a bunch of fans from the recommended list and that will be a good start.
As for the GPU, why not go for a new ATI one (58xx) ? They seem to have low power comsumption at idle (i.e. easy to cool) and are quite powerfull.
Also, check out aftermarket GPU coolers. The Accelero is popular around here (check compatibility with your card).
I'm not 100% sure on this, but I thought I read somewhere that the P193 case had some compatibility problems with full-size tower heatsinks, due to the size of the size panel fan possibly interfering with full height (approx 160mm) tower heatsinks.frenchie wrote:Get a large CPU cooler (ninja or something along those lines), a bunch of fans from the recommended list and that will be a good start.
Given this, a P183 case might be more appropriate, which also avoids the possibly loud side fan in the P193.
Other than this and replacing the stock fans with fans from SPCR's Recommended Fans list and considering stretching your budget to an SSD as mentioned by other posters, you could also try using RivaTuner to control the fan speeds on your GTX275 so that it ramps up past a certain temperature (a few degrees above what your temp would be when you starting gaming or doing intensive 3D work that needs GPU power).
Thermalright also make some good aftermarket coolers for Nvidia cards - their HR-03 or Trad ranges should have something that is compatible with a GTX275.