SPCR

Hello,

I just purchased a 12gb(3x4gb) kit and I want to know if it can be combined/mixed with the 3x1gb I already had.

if so in what order do I place them is slot

my mobo is p6t deluxe v2 and here are the merorys.

ps please note timing are different , how would that impact on comput?

TR3X3G1600C8D - CORSAIR TR3X3G1600C8D XMS3 DOMINATOR 3GB DDR3 3X1GB DDR3-1600 CL 8-8-8-24 TRIPLE CHANNEL MEMORY KIT

CORSAIR DOMINATOR 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMP12GX3M3A1600C9

P6T DELUXE V2 - ASUS P6T DELUXE V2 S.1366 INT X58/ICH10R ATX 3PCIE X16,6D.DDR3-1600MHZ FSP WIFI-AP GBLAN

http://www.newegg.ca/Product/Product.as ... 6820145321

I'd leave the old ones out because they would add so little and since memory controllers tend to be at their happiest with only half of the slots filled. If you want to give it a try anyway, consult the manual on positioning and other eventual motherboard specific advice.

ik thx for the advice

any other advice from anyone?

Any reason you need more than 12Gb RAM? It's hardly required for most applications. You'll also add perhaps 5W to your power consumption by keeping the old sticks in there regardless of them being used or not.

didnt think about corsair
I love silent pc cause Here people care about quality silence humm

so il just use 12 out of 15 for vm use

thx