IIAMA refresh 144HZ -soon after power outage booted with low

Our "pub" where you can post about things completely Off Topic or about non-silent PC issues.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
sew26
Posts: 2
Joined: Sat Jul 22, 2017 2:51 am

IIAMA refresh 144HZ -soon after power outage booted with low

Post by sew26 » Tue Nov 21, 2017 3:59 am

Hello.
My pc:
*Asus Z170-P with 6700K cpu

*Corsair 750 RM

*Gtx 1080 Ti Founder Edition

*Monitor Red Eagle IIyama 24' 1080p 144hz plugged by display port cable to GFX.

Few days ago i get power outage.

Pc was running in fire strike benchmark.
At the same time my mother was powering on electric oven in kitchen.
And then power went out in house.
Then she go to shop and buy new fuse.
Later a friend replaced fuse and power back on in house.

When power back. I booted pc first time and all was fine, refresh 144hz . But then i turn off pc . Go rest to bed. After 30 minutes i turn pc on again. And then windows 10 booted with lower refresh than 144hz. To revert 144hz i turn off monitor and turn back on.

So conclusion: It happened not just after ( not on pc first power on ) power outage.
But on second time ( second turn ) when i boot to Windows 10. On my second turning on pc, second boot to windows. So not immediately after power outage.




Just on my second turning ON pc after power outage, it happened. Thats all.

And i am not able to reproduce. Turning off pc few times and booting again,and nothing,still 144hz. Even i cut power 3 times to check,but still 144hz on boot. So maybe that was glitch or something but not related to that power outage?

My drivers: 388.13

BrianL
Posts: 6
Joined: Wed Dec 26, 2018 9:25 am

Re: IIAMA refresh 144HZ -soon after power outage booted with

Post by BrianL » Tue Aug 06, 2019 9:34 am

sew26 wrote:Hello.
My pc:
*Asus Z170-P with 6700K cpu

*Corsair 750 RM

*Gtx 1080 Ti Founder Edition

*Monitor Red Eagle IIyama 24' 1080p 144hz plugged by display port cable to GFX.

Few days ago i get power outage.

Pc was running in fire strike benchmark.
At the same time my mother was powering on electric oven in kitchen.
And then power went out in house.
Then she go to shop and buy new fuse.
Later a friend replaced fuse and power back on in house.

When power back. I booted pc first time and all was fine, refresh 144hz . But then i turn off pc . Go rest to bed. After 30 minutes i turn pc on again. And then windows 10 booted with lower refresh than 144hz. To revert 144hz i turn off monitor and turn back on.

So conclusion: It happened not just after ( not on pc first power on ) power outage.
But on second time ( second turn ) when i boot to Windows 10. On my second turning on pc, second boot to windows. So not immediately after power outage.




Just on my second turning ON pc after power outage, it happened. Thats all.

And i am not able to reproduce. Turning off pc few times and booting again,and nothing,still 144hz. Even i cut power 3 times to check,but still 144hz on boot. So maybe that was glitch or something but not related to that power outage?

My drivers: 388.13
Facing same issue here too. Help is appreciated,

Thanks in advance.
Regards
Brian

Post Reply