Hello! While the answer to this question may be in a board elsewhere, I have yet to find it
I have a Zalman 80A-HP with my Radeon 9500 Pro Retail. So far so good, with no instability issues. Is there a program out there that monitors my AGP temps? I have an ASUS P4PE motherboard.
Also, if there is a prog, what's a stable idle and load temp for a card like mine?
Any help is much appreciated. Opinions on the Zalman 80A-HP with the Radeon 9x00 cards are welcome as well. Curious to hear what you guys think
Thanks!
Take care.
Zalman 80A-HP With Radeon 9500 Pro
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 210
- Joined: Sat Jul 19, 2003 1:40 pm
- Location: Kortrijk, Belgium
normally you cant take the temps from your gpus (there is no sensor installed) so you need to buy one and put on the heatsink, as close to the core as possible, then you'll know the temps.
9x00 cards with a zm80a-hp should be no problem. Sapphire recently launched a serie called 'ultimate' with the zalman installed (see a different tread on this forum), even the 9800 pro is cooled that way so it should be save to use one on a 9x00 radeon card
9x00 cards with a zm80a-hp should be no problem. Sapphire recently launched a serie called 'ultimate' with the zalman installed (see a different tread on this forum), even the 9800 pro is cooled that way so it should be save to use one on a 9x00 radeon card
-
- Posts: 210
- Joined: Sat Jul 19, 2003 1:40 pm
- Location: Kortrijk, Belgium
thats why Zalman released a new heatsink for graphic cards with an optional fan (but zalman has had fans before which weren't that quiet i've heard)
http://forums.bit-tech.net/showthread.p ... adid=35332
edit:you can find a review here
http://forums.bit-tech.net/showthread.p ... adid=35332
edit:you can find a review here