Greetings,
I'm completely outdated in my knowledge regarding home-built PC's, so I have to ask this rather important question... does the new Radeon HD7750 have the same mounting hole configuration (all distances the same) as the old Radeon HD4670? The 4670 that I have is from Gigabyte, but I'm sure that must be irrelevant.
Also... while I'm much more likely to be buying the 7750, I'm not entirely decided on it, yet - if the 7750 does have the same configuration as the 4670, does the HD7770 then also have the same configuration (as I would assume)?
Truly hoping for a positive answer, on this..... regardless, thanks in advance.
Radeon HD7750 and 4670 = same mounting hole configuration?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 8
- Joined: Sat Sep 06, 2008 3:35 pm
- Location: Sweden
-
- Posts: 346
- Joined: Mon Dec 28, 2009 1:42 am
- Location: Australia
Re: Radeon HD7750 and 4670 = same mounting hole configuratio
Well it'll either be 43x43mm or 53x53mm. If you're thinking of using the Accelero S1, it supports both sizes, so you won't have a problem. But if you want to make sure, what you can do is compare the close up photos of the PCBs from Techpowerup reviews. Compare the mounting hole pitch to the length of the PCI-e contacts using a ruler on your monitor surface.