I bought a Sapphire 6850 and wanted to transfer my Accelero S1 from my GTS 250. Unfortunately the stock VRM cooler does not fit with the Accelero S1. The fins are too high and they get in the way of the heat pipes :
My Accelero S1 came with a VRM heatsink but the problem is they are too wide and the components on the board's surface prevent mounting the VRM heatsink. The picture below shows the VRM on a different board but you can see how wide it is. If you look at the first picture the VRM heatsink needs to be as wide as the diameter of the mounting screw at most to fit.
In one of the passive 6850 posts here the Accelero was mounted on a 6850 with what looks like the VRM coolers from the Accelero but if you look closely they are not as wide so they can fit properly.viewtopic.php?f=19&t=61631
Do the new Acceleros come with a thinner VRM cooler? Where can I buy one that will fit?