Radeon HD7750 and 4670 = same mounting hole configuration?

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Light Yagami
Posts: 8
Joined: Sat Sep 06, 2008 3:35 pm
Location: Sweden

Radeon HD7750 and 4670 = same mounting hole configuration?

Post by Light Yagami » Sat Mar 10, 2012 3:24 pm

Greetings,

I'm completely outdated in my knowledge regarding home-built PC's, so I have to ask this rather important question... does the new Radeon HD7750 have the same mounting hole configuration (all distances the same) as the old Radeon HD4670? The 4670 that I have is from Gigabyte, but I'm sure that must be irrelevant.

Also... while I'm much more likely to be buying the 7750, I'm not entirely decided on it, yet - if the 7750 does have the same configuration as the 4670, does the HD7770 then also have the same configuration (as I would assume)?

Truly hoping for a positive answer, on this..... regardless, thanks in advance.

flemeister
Posts: 346
Joined: Mon Dec 28, 2009 1:42 am
Location: Australia

Re: Radeon HD7750 and 4670 = same mounting hole configuratio

Post by flemeister » Sat Mar 10, 2012 10:53 pm

Well it'll either be 43x43mm or 53x53mm. If you're thinking of using the Accelero S1, it supports both sizes, so you won't have a problem. But if you want to make sure, what you can do is compare the close up photos of the PCBs from Techpowerup reviews. Compare the mounting hole pitch to the length of the PCI-e contacts using a ruler on your monitor surface. :)

Post Reply