Little update on my mini itx, consisting in a radical modification of the internal cooling system.
At first I move the H50 on the top (fan configured extraction);it wasn't easy to install because the tubes of corsair touched SO-DIMM, so I had to place the radiator on the top, with the fan below:http://imageshack.us/photo/my-images/641/foto1446.jpghttp://imageshack.us/photo/my-images/24/foto1447.jpghttp://imageshack.us/photo/my-images/32/foto1454t.jpghttp://imageshack.us/photo/my-images/534/foto1455.jpg
Then I decide to put on the front (as intake) a huge silverstone AP181: I finally opted for a "homemade" solution that guarantee a good accessibility for maintenance / cleaning / etc ..http://imageshack.us/photo/my-images/96/foto1450.jpghttp://imageshack.us/photo/my-images/339/foto1451.jpg
As you can see the fans is "stuck" between two soft media (recovered from the packing of the case: D) On the floor of the case I put a small metal stand, while the fan on the top fits against the small ledge below the 5.25" bay; since there is enough space I've been able to keep the original dust filter.http://imageshack.us/photo/my-images/146/foto1452.jpg
The second update concerns a problem related to overclocking and summer temp: my mobo (asus M4A88T-I) has 3+1 phases (that's why there is the 95W limit for CPU);'cause I put on a 1055T 95w, I previously placed heat sinks (enzotech) on the vrm-mosfets to avoid throttling of frequencies (if the temperature of the VRM rise too much the mobo automatically drops the multiplier down): on winter everything worked without any issues, but on summer temperatures rise too much, and so I put a 40mm fan directly on the mosfet, controlled by the motherboard:http://imageshack.us/photo/my-images/64/foto1458.jpg/
thanks to the fan no more drop problems, and my cpu is now overcloked to 3300mhz (236x14, turbo core enable @ 3894): here there is a screenshots of prime 95 after 27hhttp://imageshack.us/photo/my-images/534/pime953300mhz.jpg