Page 1 of 1
proliant microserver and linux lmsensors
Posted: Sat Mar 19, 2011 8:16 am
by squiz
Has anyone got (linux) lmsensors working? The chipset doesn't seem to be supported.
http://comments.gmane.org/gmane.linux.d ... sors/23647
Re: proliant microserver and linux lmsensors
Posted: Sat Mar 19, 2011 8:51 am
by HFat
You may need to install k10temp. It's explained in your link. You don't state what kernel and distribution you're using so it's hard to be more specific.
Re: proliant microserver and linux lmsensors
Posted: Sat Mar 19, 2011 9:49 am
by squiz
Sorry I meant to post this to
viewtopic.php?f=20&t=60236&hilit=proliant+microserver. I have debian stable (squeeze) and kernel 2.6.32-5-amd64. I was just wondering if anyone else had already got it working.
Re: proliant microserver and linux lmsensors
Posted: Sat Mar 19, 2011 10:21 am
by HFat
It depends what you mean by "working". It's explained in your link.
The reported temperature changes make sense and are consistent with the temperatures reported by SMART so it's useful even if the baseline is off. I didn't compare it with the BIOS reading.
I think you will need to install k10temp if you want to use the squeeze kernel. I am not running Debian on my Microserver.