It is currently Sat Dec 20, 2014 4:05 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: need a triddr3 that will fit u12p horizontal inp183 maybe OC
PostPosted: Sun Jul 01, 2012 6:22 pm 
Offline

Joined: Thu Jun 28, 2012 12:24 pm
Posts: 15
HI dear friends made a new post any p183 /noctua expert outthere?


made a new topic since I wonder if whiy there are no 16gig kit for trichannel.. is it 12g then 24 gig? if so i choose 12g

HI have a antect p183 with p6t deluxe v2
I prefer my :o noctua u12p to be horizontal :o (cause I think I could put the aiflow vertical too)



ok please note that I think I need trichannel ddr3 . Could anyone help me select the best ddr3 for gaming(and multiple vm.
I might overclock later on later.... THAT will FIT"""

first It needs to fit in my rig,
second I want best performance
third, Sileeeence is important

I have a ok budjet (I can pay them all exect the 196$), silence and performance are prioritys. (corsair or gskill seems to have a good reputation.)

can you help me choose among thoses I have no clue about timing OC and stuff.
http://www.newegg.ca/Product/ProductLis ... Mark=False


also is it possible eventually to add another 12g even if memory has different timmings
appreciate

I also have this videocard:
896-P3-1255-AR - eVGA GTX 260 CORE 216 55NM 576MHZ 896MB 1.998GHZ GDDR3 PCI-E 2XDVI-I HDTV OUT


Top
 Profile  
 
 Post subject: Re: need a triddr3 that will fit u12p horizontal inp183 mayb
PostPosted: Mon Jul 02, 2012 12:41 am 
Offline

Joined: Mon Mar 17, 2008 1:49 pm
Posts: 1256
Location: UK
You already posted this before. Any reason why you are posting again?

viewtopic.php?f=20&t=64629

_________________
Silverstone SG03B: E8200, Asus P5E-VM HDMI, 2Gb RAM, Leadtek 9600GT+S1 rev. 2, Samsung 500Gb, Seasonic X-400, 2x Akasa 120mm, Scythe Zipang 2 fanless


Top
 Profile  
 
 Post subject: Re: need a triddr3 that will fit u12p horizontal inp183 mayb
PostPosted: Mon Jul 02, 2012 4:32 am 
Offline
Patron of SPCR

Joined: Sun Nov 09, 2003 7:18 am
Posts: 1073
Location: UK
Hi, you have an Intel s1366 based PC and these CPUs have triple channel memory controller. That is it can access 3 DIMMs at once for best performance. Your motherboard has 6 slots you should be filled with one or two sets of 3 DIMMs. For example someone might have started with 3x2GB (6GB total) and later upgraded by adding 3x4GB for 18GB total. This example is optimal for performance. You can put memory in not in sets of 3 and it will work; just slower performance as will only read/write 1 or 2 DIMMs at a time. IIRC the difference between dual channel and triple channel is small unless using a hex (6) core CPU and working it very hard.

16 does not come from any multiple of 3 hence why you can't have 16GB triple channel kit! you could have 3x4 + 3x1 = 15GB or 3x4 + 3x2 = 18GB. The max you can have is 6x4GB = 24GB, I don't think 8GB (each) DIMMs will work at all.

I would suggest DDR3 1600 RAM is fast enough and not worth trying for faster speed so just get "basic" memory of that speed with no or simple heat sink to clear under your CPU cooler and good to go. If you have to you can cut the fins on the CPU cooler. Do NOT cut / bend the heatpipes or they will stop working!

Seb

_________________
i7 2600k under NH-C14 w/2xTY-140PWM fans, P8P67Deluxe, 8GB RAM, GTX560Ti OC w/TwinTurbo II and BIOS fanspeed mod. 2x120GB HyperX 3K RAID 0 & 2TB EARX in Scythe QuietDrive outside case. Antec Signature 650 fan swapped. CoolerMaster 201C with 2x92 + lower 92mm fan out rear, holes-in-floor and mesh top+front intakes.


Top
 Profile  
 
 Post subject: Re: need a triddr3 that will fit u12p horizontal inp183 mayb
PostPosted: Thu Jul 05, 2012 2:38 pm 
Offline

Joined: Thu Jun 28, 2012 12:24 pm
Posts: 15
nice answer seb Ill do 3x 4 g plus my 3x1 gig
TR3X3G1600C8D - CORSAIR TR3X3G1600C8D XMS3 DOMINATOR 3GB DDR3 3X1GB DDR3-1600 CL 8-8-8-24 TRIPLE CHANNEL MEMORY KIT


could you or anyone tell me wich would fit for sure with my noctua horizontal?from ne newegg.ca link in intro?


I have no clue about timming thing, my 3x1g seems to be 888 what will happen if the 12g kit has a different timing? anxiety lol


I wonder how to place them , in wich order in the slots also
I appreciate that


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group