Help me silence my W/C Rig

The alternative to direct air cooling

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Maviryk
Posts: 9
Joined: Thu Dec 15, 2005 11:09 am

Help me silence my W/C Rig

Post by Maviryk » Fri Mar 09, 2007 5:00 am

This is my rig:
Image

The PSU is recessed in the middle of the case so that a PSU muffler/baffle can be placed at the rear of the case, you can see the spot in the pic.

Currently I am using 3 antec tricool fans on low, do ya'll know if these are as quiet as yate loons? For rad's using BIP GT 240 and a BIP GT 120. The pump is sitting on top of foam. Currently the loudest components in the case are the PSU (OCZ 700w) and the two HD's... oh and the DVD rom when it's running.

I still have to cover everything in foam sound dampener, maybe get new fans, a better NB heatsink, a better ramdac heatsink, and remount my HDs.

The HDs are mounted via rubber bushings on a 3"x7" sheet of metal, and that sheet of metal is hanging via bungie cord on the 5.25" drive bays.

Your thoughts and suggestions on how to quiet down my rig will be much appreciated.

angelkiller
Posts: 871
Joined: Fri Jan 05, 2007 11:37 am
Location: North Carolina

Post by angelkiller » Fri Mar 09, 2007 8:02 am

Can't help you with everything, but I do know that Yate Loons are quieter than the Tri-Cools. Tri-Cools are fine for a genrally quiet system, but are pretty loud for a really quiet/silent system. As for those Raptors, you might want to look into a Scythe Quiet Drive.

echn111
Posts: 161
Joined: Thu Nov 02, 2006 2:15 pm
Location: UK

Post by echn111 » Sun Mar 11, 2007 8:09 am

Not sure if it can be done in your set-up, but when I had a P180, I found that too much noise came from the unbaffled top fan hole, so I sealed the hole shut from the inside with acoustic dampening material. But in my case, I used the rear hole as the exit for the hot air.

And replaced all the fans. I went for Nexus fans, but Yates are the same.

But, really if the PSU is the most noisy part, just get a quiet seasonic PSU.

HammerSandwich
*Lifetime Patron*
Posts: 1288
Joined: Sat Oct 25, 2003 3:21 pm
Location: 15143, USA
Contact:

Re: Help me silence my W/C Rig

Post by HammerSandwich » Mon Mar 12, 2007 10:03 am

Maviryk wrote:Currently the loudest components in the case are the PSU (OCZ 700w) and the two HD's...
<snip>
Your thoughts and suggestions on how to quiet down my rig will be much appreciated.
How about a new PSU along with quieter HDs and/or enclosures?

Maviryk
Posts: 9
Joined: Thu Dec 15, 2005 11:09 am

Post by Maviryk » Tue Mar 13, 2007 11:59 am

I just ordered a bunch of Yateloons to replace all the fans, including the one in the PSU.

As for the Raptors, I haven't put my sides on yet, waiting for the sound insulating foam to come, I haven't listened to the case with the side on yet, maybe it will be quieter with it on.

Post Reply