It is currently Thu Jun 21, 2018 1:18 am

All times are UTC - 8 hours

Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Need advice for upgrading Gaming Rig
PostPosted: Sun Aug 22, 2004 8:10 pm 

Joined: Sun Aug 22, 2004 7:06 pm
Posts: 16
After recently replacing the case fan, CPU fan and power supply fan with cheap Antec $12 quiet fans... my gaming rig frequently reaches 170 degrees F and shuts down. I need recommendations.

Unless these components are really causing problems, i'd like to keep:

AMD 2000+ CPU - it's sufficeint for my RTS gaming and programming needs.

CPU HEATSINK: ... goliathse/ - nice thing is that it comes with a fan adapter so i can acommidate a small or large (case size) fan

from New Egg - it's treated with Dynamat (sound dampening material) and doesn't rattle

6Y060L0 Fluid Dynamic Bearing 60 Gig drive

2 512 MB Samsung DDR 400

Stuff i presume i need to replace:

Biostar KT4V - It doesn't seem to reliably support my DDR 400 ram, and has problems letting windows XP run the intelligent CPU fan speed control. if it's really much quieter, i'll just go with an AMD 64 board and new CPU.

Nvidia Gforce FX 5600 XT - it's a fast card, with nice options. but, it's onboard cooling fan is louder than my CPU fans. can i replace this fan??

CPU fan:
plz recommend - as i mentioned, the heatsink can accomidate larger case sized fans

Allied AL-A300ATXREV:B - came with the case. I'd like a new one with intelligent fan speed management

plz recommend

 Post subject:
PostPosted: Mon Aug 23, 2004 5:50 am 

Joined: Fri Jul 23, 2004 11:10 pm
Posts: 657
Location: AB, Canada
yeah, you can replace the 5600's fan with a VGA Silencer or zalman's heatpipe thingy or whatever. what were your temps like before? that seems weird, with that cpu/gpu your temps should be fine with one case fan. does that Antec fan you put on your cpu hs do rpm monitoring?
that all sounds weird, unless the fan you put on your CPU is like... 200rpm and your old case fan was a vantec tornado too. :?

 Post subject:
PostPosted: Mon Aug 23, 2004 6:57 am 

Joined: Tue Mar 09, 2004 9:05 am
Posts: 1443
Location: Turkey
I have a feeling you have a serious PSU problem. So before doing anything else, I'd be replacing my PSU. Look at the recommended list, there are lots of options there.

Next, I'd have a look at the CPU HSF. Did you replace the fan on that? If yes, then it probably was a bad idea. I'm sure they put a 8000 rpm 80mm fan on top for a good reason. (LMAO at the "quiet at 5000 rpm" bit :D)

Check your HSF mounting. Is it properly mounted? What's the thermal interface material (TIM)? Was it a thermal pad? If it's anything other than Arctic Silver, I strongly suggest you clean the surfaces and reapply TIM, preferably Arctic Silver 5.

Check these out first. I think after the PSU change, you may want to keep your mobo. If the TIM application doesn't solve your heat problems, I suggest you get a whole new CPU HSF (state your budget, and we'll suggest something) Bigger case fans on fan ducts is usually a bad idea.

Clean out the insides of your case (reroute your cables for max airflow) Then check if your case fans do the job or not.

These are all good suggestions to do BEFORE you consider changing over to an Athlon64. You may just get to keep your dollars or, if you still decide to upgrade, prevent you from overheating your new processor.

Thor's Hammer
Loki's Magic: Coming soon...
Odin's Chariot

 Post subject:
PostPosted: Mon Aug 23, 2004 7:02 am 
Friend of SPCR

Joined: Mon Apr 28, 2003 4:37 am
Posts: 1310
Location: Finland
I'd also blame the dust bunnies. Most likely that 8000rpm beast has killed them all, but still... :wink:



E6600 ([email protected],163V, [email protected],237V), Ninja rev. B, AB9 Pro, 4x1 GB Corsair (CM2X1024-6400), MSI 7600GS, Samsung HD501LJ/HD401LJ/SP2504C, Plextor PX760SA, Seasonic S12-430, Nexus Fans, Antec Solo, ViewSonic VP201b

 Post subject:
PostPosted: Mon Aug 23, 2004 12:01 pm 
Patron of SPCR

Joined: Mon Aug 02, 2004 2:23 am
Posts: 749
Location: The Netherlands
I used to cool my 5600 with a 80mm fan suspended closely below it and shutting down the onboard gpu fan. With my Asus card I could do this through an Asus software utility called SmartDoctor (nice because I wasn't really comfortable with actually unplugging the gpu fan).

Do check your gpu temps before actually unplugging the gpu fan though; wouldn't want to leave you with a fried card :wink: And of course, the VGA Silencer mentioned before is a more elegant solution but this worked for me.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group