It is currently Mon Oct 15, 2018 6:40 pm

All times are UTC - 8 hours

Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: what creates more heat, LCD vs CRT?
PostPosted: Wed Oct 20, 2004 10:27 pm 

Joined: Fri Apr 23, 2004 12:57 am
Posts: 175
Location: Ontario, Canada
I'm thinking CRTs because they use more power, am I wrong here?

 Post subject:
PostPosted: Thu Oct 21, 2004 1:46 am 

Joined: Thu Jul 15, 2004 12:44 pm
Posts: 380
Location: UK
CRTs for definate - it's an inherant part of the design. If it didn't produce heat it wouldn't work.

Quick physics rundown:
Any CRT has, at the back of the tube, 3 wire coils (red, green, blue). These coils are heated by electricity passing though them to a couple of hundred degrees. This has the side effect of "boiling" electrons off the wire - they get so energetic they detatch from the coil.
Under normal circumstances, they'd just zip about randomly til they hit something and got canceled or joined. In a CRT, there is a sequence of electromagnets that first makes sure the electrons are moving towards the front of the monitor, and then focuses them to a point. Further electromagnets direct the beam across the monitor. The action of the beam hitting the screen produces the light output from the monitor.
So, basicly, a CRT is an electric heater with lots of electromagnets round it. Both electric heaters and electromagnets use large ammounts of power, and both tend to get rather hot.

LCDs, on the other hand, use pigmented red, green, and blue cells that can be switched from being totally opaque through varying degrees of semi-transparency by presence or abcense of a small electric current. The light output from an LCD comes from a flourescent tube light (or several) behind the cell panel, which shines through the semi-transparent cells.
This is a low power solution, so produces significantly less heat. No power hungry magnets or heaters here. However, the panels operate at low voltage, so a transformer is needed. This does produce heat. Often they are provided as a "brick" seperate from the monitor, so the total heat form the panel depends on where the power is transformed.

This concludes today's physics lesson.

 Post subject:
PostPosted: Thu Oct 21, 2004 12:59 pm 

Joined: Mon Oct 11, 2004 8:27 pm
Posts: 31
Location: Virginia
Great writeup.
You learned me well, =P

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group