SilenX 340W 0 dab LUXURAE PSU
Posted: Sat Nov 20, 2004 6:46 pm
Hi,
Need some help concerning SilenX 340W 0 dBA LUXURAE PSU.
My system is made up of:
M.S.I. P4 Main Board. [ 865PE NEO2-V ]
Pentium 4 2.60GHZ
512mb Ram
Thermaltake Fanless 103 CPU cooler
Windows XP Home Edition.
Antec SLK3700-BQE case.
When I first boot up, everything is fine, but 5 minutes later, it SHUTS DOWN. Testing the PSU with the Antec ATX Power supply tester shows the PSU as " dead "
The next day, retesting the PSU, it shows as " good ", including all the voltages.
I tried again, with the PSU out of the PC case, with the PC side panell off, and a 12cm fan running, in 5 minutes, the same result, total shut down, PSU testing " dead " again.
I connected a Antec True Power 480W PSU, and everything runs fine, no shutdowns.
The SilenX LUXURAE PSU was bloody expensive. [ $ 380 Australian ] not including the shipping cost
Any help or suggestions
I will be very grateful
Franc.
Need some help concerning SilenX 340W 0 dBA LUXURAE PSU.
My system is made up of:
M.S.I. P4 Main Board. [ 865PE NEO2-V ]
Pentium 4 2.60GHZ
512mb Ram
Thermaltake Fanless 103 CPU cooler
Windows XP Home Edition.
Antec SLK3700-BQE case.
When I first boot up, everything is fine, but 5 minutes later, it SHUTS DOWN. Testing the PSU with the Antec ATX Power supply tester shows the PSU as " dead "
The next day, retesting the PSU, it shows as " good ", including all the voltages.
I tried again, with the PSU out of the PC case, with the PC side panell off, and a 12cm fan running, in 5 minutes, the same result, total shut down, PSU testing " dead " again.
I connected a Antec True Power 480W PSU, and everything runs fine, no shutdowns.
The SilenX LUXURAE PSU was bloody expensive. [ $ 380 Australian ] not including the shipping cost
Any help or suggestions
I will be very grateful
Franc.