need advice on cpu cooler for antec isk-110

Got a shopping cart of parts that you want opinions on? Get advice from members on your planned or existing system (or upgrade).

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
bandit99
Posts: 11
Joined: Sun Jul 22, 2012 6:10 pm

need advice on cpu cooler for antec isk-110

Post by bandit99 » Sun Jul 22, 2012 6:29 pm

I need advice on a new build.

Antec isk-110 case
Asus p8h77-i motherboard
Intel 2120t cpu
Samsung 830 256gb drive
Samsung MV-3V4G3D/US 2x4gb lowprofile ram

The system will be used for browsing, videos, and photos but no gaming.

Some reviews of the 2120t say the fan is noisy. Should I build the system as is and see if the fan bothers me or order an aftermarket cooler right off the bat?
I'm looking at the following coolers
Scythe Zozuti
Silverstone NT07
Thermaltake X3 Slim

I'm certain all three will fit height wise but not so sure about the width and lenght. I've never put a mini itx system together before. Any help would be appreciated.

ces
Posts: 3395
Joined: Thu Feb 04, 2010 6:06 pm
Location: US

Re: need advice on cpu cooler for antec isk-110

Post by ces » Sun Jul 22, 2012 7:19 pm

If you are assembling it yourself, try the stock fan first. If not, just get the Scythe Zozuti. It will better than either of the other two... and are you certain the other two will even fit?

bandit99
Posts: 11
Joined: Sun Jul 22, 2012 6:10 pm

Re: need advice on cpu cooler for antec isk-110

Post by bandit99 » Mon Jul 23, 2012 6:23 am

The Scythe Kozuti seems to be the largest of the three heatsinks listed.

Scythe Kozuti 110x103x40mm http://www.newegg.com/Product/Product.a ... Tpk=kozuti

Thermaltake Slim X3 92x99x36mm http://www.newegg.com/Product/Product.a ... =slim%20x3

Silvertstone NT07 93x93x36.5mm http://www.newegg.com/Product/Product.a ... 6835220040

The following will sound goofy so please bear with me. The cpu socket is off center on the motherboard. Will the above heatsinks extend over the edge of the mini itx mb?

Thanks from the new guy

flemeister
Posts: 346
Joined: Mon Dec 28, 2009 1:42 am
Location: Australia

Re: need advice on cpu cooler for antec isk-110

Post by flemeister » Mon Jul 23, 2012 7:07 am

The Scythe Kozuti won't extend over the edge of the Asus P8H77-I:

http://www.hardwareluxx.de/community/f2 ... 565-5.html

bandit99
Posts: 11
Joined: Sun Jul 22, 2012 6:10 pm

Re: need advice on cpu cooler for antec isk-110

Post by bandit99 » Mon Jul 23, 2012 7:29 am

Thank you very much for the link. I'll be ordering parts today.

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

Re: need advice on cpu cooler for antec isk-110

Post by Worker control » Mon Jul 23, 2012 10:52 am

flemeister wrote:The Scythe Kozuti won't extend over the edge of the Asus P8H77-I:

http://www.hardwareluxx.de/community/f2 ... 565-5.html
It does seem to cover the PCI-E slot, unfortunately.

bandit99
Posts: 11
Joined: Sun Jul 22, 2012 6:10 pm

Re: need advice on cpu cooler for antec isk-110

Post by bandit99 » Mon Jul 23, 2012 11:09 am

I did see that the Kozuti covered the pci slot but I can't use an expansion card with the antec case any ways.
http://www.antec.com/product.php?id=704515&fid=288

Antec_Rep
Posts: 52
Joined: Mon Oct 12, 2009 3:37 pm
Location: Fremont, CA

Re: need advice on cpu cooler for antec isk-110

Post by Antec_Rep » Thu Jul 26, 2012 7:27 am

Sounds like a great project you're working on! :D

bandit99
Posts: 11
Joined: Sun Jul 22, 2012 6:10 pm

Re: need advice on cpu cooler for antec isk-110

Post by bandit99 » Sat Jul 28, 2012 9:01 am

I put the system together last night.
Pictures in the gallery.

viewtopic.php?f=14&t=64799

Post Reply