It is currently Mon Jul 28, 2014 9:53 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Advice on small factor Office-PC
PostPosted: Thu Sep 27, 2012 10:50 am 
Offline

Joined: Thu Sep 27, 2012 10:35 am
Posts: 1
Hello. I'm currently putting together a small computer for my mother.

I intend to build in a Antec ISK-110 VESA mounted on back of a monitor.

These are the parts i've decided on so far:

Gigabyte GA-A75N-USB3
AMD A-Series A4-3300
Kingston DDR3 HyperX 1600MHz 8GB
Kingston HyperX 3K SSD 120GB

What really boggs my mind is deciding on the CPU-Cooler.
I'm not really convinced on AMD's stock-cooler cooling capabilities. I'm looking at the Scythe Kozuti at this moment. But i'm not at all sure it wont extend over my motherboards edge. What do you think?
Should i trust the Stock-cooler or do you have any other recommendations?

Thank you in advance.


Top
 Profile  
 
 Post subject: Re: Advice on small factor Office-PC
PostPosted: Fri Sep 28, 2012 7:21 am 
Offline
*Lifetime Patron*

Joined: Tue May 15, 2007 1:39 am
Posts: 1922
Location: Finland
Kozuti is SPCR Recommended and the smallest cooler I can think of, so only choice I can see here. Reference coolers have been nothing but miserable in my experience.

Scythe specs say the Kozuti is 110 x 103 x 40 mm. Assuming it's symmetrical, that is 110 / 2 = 55 mm and 103 / 2 = 51.5 mm from the CPU centre, respectively. The short side faces the RAM slots (i.e. cooler is longer sideways).

Edit1: ignore prior math, wrong figures.

Edit2: redid the math. The mini-ITX board is 170 x 170 mm (not 150 mm), and the picture I have puts this board at 890 px across, so 170 mm / 890 px = 0,1910112359550562 mm/px. I'm not sure about this mounting scheme, but I PRESUME the centre point is centre of the CPU's area in the socket. From this point, there is 54 mm of clearance to the second RAM slot, meaning the Kozuti MIGHT fit, but you can't use the first RAM slot. The bottom edge is not a problem, since there is 70 mm of clearance that way.

It's a tight squeeze overall with a "flat" cooler.

PS. Out of curiosity, I measured the GA-H77N-WIFI using the same method, there the sideways clearance is 59 mm, so the Kozuti should definitely work with just 1 RAM stick.

_________________
Case: FD Define Mini
Parts: P8Z77-M Pro µATX, i5-3570K @stock, N650Ti-1GD5/OC, G.Skill 2x4/1600/CL9 DDR3U, Xonar DX, WD G 1 TB, m4 128 GB, RX-5300 PSU
Cooling: Noctua NH-U12P SE2 + Scythe SS PWM, 2x Noctua NF-P12
Extras: Eaton UPS, Dell 24" EIPS, Ducky kb, SteelSeries m, Synology DS213j NAS
idle & load: CPU 32 °C & 44 °C @ 300/600 & 600/800 RPM, GPU 35-65 °C @ 1200-1650 RPM


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group