It is currently Tue Nov 20, 2018 3:22 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: HDD upgrade in server - sys drive
PostPosted: Fri Oct 12, 2018 5:41 am 
Offline

Joined: Wed Apr 09, 2003 3:21 am
Posts: 218
Location: Denmark
I have WHS11 server based on this hardware http://www.silentpcreview.com/forums/viewtopic.php?f=28&t=67905.

Currently it is populated with a 1,8TB system hd, a 3TB drive to host the dbase for the movie software (EMBY) and further 4X WD 4TB in mirror and 4X WD red 6 also in mirror for storage.
I am now waiting for the 12TB WD red to come out, and then I'll transition this to 4-6x12TB drives. I have been quite satisfied with the mirror function, and am now contemplating if I in the new setup should also setup the sys and dbase drive in mirror, to reduce the risk from disk failure (I had my share in the past). I have set it all up in windows, due the ease of working with it.

I use a Marvell sata controller, but it does not pass SMART info and need drivers not included in windows, and I might change to one that do and that do, if anyone knows of such a 4-port sata controller.

_________________
My first IBM-compatible computer was a 16 MHz 386sx. The term IBM-compatible was later replaced with the acronym PC...


Top
 Profile  
 
 Post subject: Re: HDD upgrade in server - sys drive
PostPosted: Tue Oct 16, 2018 4:34 pm 
Offline

Joined: Thu Aug 13, 2015 1:08 pm
Posts: 24
Location: Vancouver B.C
Schroinx wrote:
and am now contemplating if I in the new setup should also setup the sys and dbase drive in mirror, to reduce the risk from disk failure (I had my share in the past).

Depends on what's important to you. Mirroring your system and database drives is more an assurance of server availability than backup (mirroring will not prevent, for example, accidental over-writes). If the main goal is preventing data loss and not 24/7 availability then backing up the drives to the array maybe a better option.

Quote:
I use a Marvell sata controller, but it does not pass SMART info and need drivers not included in windows, and I might change to one that do and that do, if anyone knows of such a 4-port sata controller.

WHS V2 reached end of life in 2016 and with MSFT de facto abandoned it soon after its release, there maybe compatibility issues with adding current generation hardware to it.

If 6x12TB HDD is within your budget, have you considered running 5x12TB in RAID6? The saving from a 12TB HDD should be enough for new HW or Windows Server Essential.


Top
 Profile  
 
 Post subject: Re: HDD upgrade in server - sys drive
PostPosted: Tue Oct 16, 2018 5:47 pm 
Offline

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 3334
Location: Guatemala
Schroinx wrote:
I use a Marvell sata controller, but it does not pass SMART info and need drivers not included in windows, and I might change to one that do and that do, if anyone knows of such a 4-port sata controller.
Im using with WHS2011 2x IBM 1015 flashed to IT it does pass the smart reading from the drives, but the easiest would be LSI 9207 which are HBA from factory, you can find them on ebay, i bought mine for $50. These are 8 ports, but i think there are 4 port versions, although the saving is almost nothing so up to you. You do need to buy the breakout cables, depending on the card, in my case was from 8087 to sata.

As a recommendation, check also unRaid its a very easy to use server linux distro, in case you might want to move from WHS2011. Although im still very happy with WHS2011+Stablebitt scanner/drivepool.

_________________
GameMi - Intel i7 8700K + AsRock Z370 Tachi + Asus RTX2080Ti Strix | MiniMi - Intel i7 8700K + ASRock Z370ITX + MSI RTX2080Ti
StreaMi - Intel i9 7940X + AsRock X299 Taichi + Asus GTX1080Ti Strix | WorkMi - AMD 1950X + AsRock X399 Taichi + MSI GTX1080
ServeMi - Intel Xeon E3-1230 + Supermicro X9SCM-F + 144TB | StoreMi - Intel Xeon E3 1240v5 + Supermicro X11SSM-F + 42TB | CamMi - Intel i7 4770K + MSI H81i + Blue Iris


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group