It is currently Mon Sep 22, 2014 3:37 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: My 'silent' Cad Workstation Build
PostPosted: Thu Jul 11, 2013 6:58 am 
Offline

Joined: Sat Dec 31, 2011 10:05 pm
Posts: 11
I work for a smaller company and one of my hats is PC builds and maintenance. I'm posting this to hopefully save someones time.

The heaviest uses of our PCs are Autocad and Solidworks. We have many computers in single rooms, so keeping them reasonably quiet

and maintenance free is one of my main goals. I shouldn't have to tell you that fixing a work computer on the weekend is not my

favourite thing to do! :)

I'll detail my most successful configuration to date for high power and low noise.

The parts that really matter:

Case - LIAN LI PC-A05FNB Black Aluminum ATX Mid Tower Computer Case
MB - ASUS P8Z77-M R
CPU - INTEL XEON E3 1230V2 3.3G HT R
CPU Cooler - Thermalright Macho 120
GPU - AMD 100-505649 FP (Firepro) V4900 1G R
GPU Cooler - PROLIMATEC PRO-MK-26-BK
Fanless PSU 400+ Watts

I also use lower profile ram, or you can't rotate the CPU cooler properly to clear the GPU cooler mounting bracket, SSD of your

choice is a must, and obviously quality 120mm PWM fans.

Build Notes: that I had to modify the Prolimatec mounting bracket by taking a grinder with a cut disk and cut 2 of the spars shorter

on the mounting X. This is because the AMD Firepro has the GPU processor a lot closer to the slot than standard gaming GPUs have.

Otherwise I reused part of the mount from the factory AMD cooler to act as a spacer on the back of the card because there were some

ICs of some description on the back side of the card. The only modification there was to drill the holes a little larger to clear

the shoulder of the Prolimatec mounting bolts.

Thermal Performance:

See Screen Shots

SpeedFan showing my computer as I'm writing this. The ambient air is 26 deg C.
SpeedFan and Prime95 after 10 mins of Torture Test - 8 Threads - Max Core temp noted was 74 deg C, Max Fan RPM 1103 (2 120mm fans)
Speedfan and Furmark after 10 mins - This is the first time I've run this on this computer.. I noted that the 2 120mm fans tied to the GPU temp only turned on for ~30 seconds. Obviously the way they're setup now they aren't achieving much

Other shots of the build in general

I hope this information proves to be helpful for someone.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: My 'silent' Cad Workstation Build
PostPosted: Thu Jul 11, 2013 6:59 am 
Offline

Joined: Sat Dec 31, 2011 10:05 pm
Posts: 11
Can't attach more than one file.

GPU Clearance to Slot (tight!)


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: My 'silent' Cad Workstation Build
PostPosted: Thu Jul 11, 2013 7:01 am 
Offline

Joined: Sat Dec 31, 2011 10:05 pm
Posts: 11
At Idle


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: My 'silent' Cad Workstation Build
PostPosted: Thu Jul 11, 2013 7:02 am 
Offline

Joined: Sat Dec 31, 2011 10:05 pm
Posts: 11
Prime95


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: My 'silent' Cad Workstation Build
PostPosted: Thu Jul 11, 2013 7:04 am 
Offline

Joined: Sat Dec 31, 2011 10:05 pm
Posts: 11
Furmark


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: My 'silent' Cad Workstation Build
PostPosted: Tue Aug 06, 2013 8:08 am 
Offline
Friend of SPCR

Joined: Tue Jul 08, 2008 4:53 am
Posts: 1314
Location: CT
Nice.
Maybe a mod could move this to the gallery ?

_________________
Main/gamming : Antec Solo|X-650|Asus P5Q-E|Intel Q9550@3.4GHz|HR-01 Plus 120mm Nexus @6V|Corsair 2x2Go XMS2 DHX cas 4 @4-4-4-12|Exhaust Nexus 120mm @9V|Intel X25M G2 160Gb|Samsung 1TB in SQD|2xGigabyte GTS450 OC (@900/1900/3800)|GPU fan 120mm Nexus @6V
HTPC/folder/Storage : Silverstone|E5300 with Samurai-Z|2Go RAM|GTX460@800|2x1To WD EARS|Intel X25M G2 80Go

Fold with SPCR


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group