Page 1 of 1
new revs of the cool'n'quiet and undervoltable lists avail.
Posted: Sat Apr 02, 2005 3:54 am
by jojo4u
Hi folks,
I'm back from New Zealand and updated the recommended lists. Unfortunately, there is a problem with the postnuke of spcr.com with this hudge tables, so i put them temporary in my site. The are a bit ugly without the stylesheets, but i hope you enjoy them.
http://home.arcor.de/jojo4u/silentstuff ... il0105.htm
http://home.arcor.de/jojo4u/silentstuff ... il0105.htm
Posted: Sun Apr 03, 2005 7:02 pm
by Jim Byram
The Soltek SL-K890Pro-939 (socket 939, VIA K8T890 + VT8237) works fine with CnQ.
Posted: Sun Apr 03, 2005 7:08 pm
by ilh
The DFI nF4 Ultra and SLI support CnQ and undervolting down to 0.8V.
Posted: Sun Apr 03, 2005 8:26 pm
by Tibors
On the CnQ page the MSI RS480M2-IL is listed as a socket 754 ATX board, but it is a socket 939 micro-ATX board.
For the MSI RX480M2 one of the sources given is a post by me about the MSI RS480M2-IL.
P.S. The difference between the RS480 and the RX480 is that the RX480 doesn't have integrated video. The rest is the same.
Posted: Sun Apr 03, 2005 10:42 pm
by jojo4u
Tibors wrote:On the CnQ page the MSI RS480M2-IL is listed as a socket 754 ATX board, but it is a socket 939 micro-ATX board.
Sorry for the mistake, looks like I mixed it up a little bit.
Posted: Tue Apr 05, 2005 4:08 am
by Jan Kivar
Paris? Did You mean Newcastle?
Code: Select all
MSI K8N Neo series 754 ATX nForce3 250GB only Paris & Clawhammer
/ works with 2 memory sticks
/ fan control down to 5V
Cheers,
Jan
Posted: Tue Apr 05, 2005 7:15 am
by jojo4u
Jan Kivar wrote:Paris? Did You mean Newcastle?
Code: Select all
MSI K8N Neo series 754 ATX nForce3 250GB only Paris & Clawhammer
/ works with 2 memory sticks
/ fan control down to 5V
No, the C't states explicitely that CnQ works only with Clawhammer and Paris (=Sempron = half the Cache of Newcastle). (c't 22/04, Seite 198)
Posted: Wed Apr 06, 2005 7:41 am
by Jan Kivar
jojo4u wrote:No, the C't states explicitely that CnQ works only with Clawhammer and Paris (=Sempron = half the Cache of Newcastle). (c't 22/04, Seite 198)
OK, I actually haven't tried AMD's Cool 'n' Quiet.
Both ClockGen/CrystalCPUID work perfectly on my MSI K8N Neo Platinum with a Newcastle 3000+.
Cheers,
Jan
Posted: Thu Apr 07, 2005 3:28 am
by Jan Kivar
As per request I tested the AMD's Cool 'n' Quiet driver, and it worked. It was going from 2 GHz to 1 GHz, and I did see 1.8 GHz once or twice (ThrottleWatch). Seems that either MSI has improved the board BIOS-wise, or C't has made some sort of error.
Cheers,
Jan
Posted: Thu Apr 07, 2005 11:16 am
by MikeC
FYI,
Undervoltable Motherboards and
CnQ Motherboards have both been updated now, with Joachim's data. No more article length limit.