Undervolting: how low can you go?

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Undervolting: how low can you go?

Post by Palindroman » Thu Jul 12, 2007 1:33 am

I've done a bit of undervolting with several CPUs and discovered that one can save quite a bit of energy with it, especially if you're involved in things like folding@home. Although the procedure is quite simple, finding out the minimum voltage values for your CPU takes a bit of time testing etc. It would be nice to have a collection of data that people can use as a reference point. Therefore I'd like to ask everyone who has undervolted his CPU to submit his results.

Here's a tutorial. It's a bit outdated but still useful. There's also a lot of info to be found on this forum as well.

Programs for undervolting (and -clocking):

RMClock
CrystalCPUID
or for notebooks Notebook Hardware Control

Programs for stress testing (there are many others):

Prime95
Orthos


WARNING: Although CPUs of same type and stepping usual share the same undervolting options, there can always be individual discrepancies. The results shown below are indications.


We're looking for minimum voltage at minimum clock speed and minimum voltage at stock speed (with a stable system of course). Here's what we've got so far:

Athlon XP 2500+ - Barton (1.83GHz)

Stock: 1.87 GHz (11*170) @ 1.375 V (stock 1.60v)


AMD XP 2500+ - Mobile Barton stock - 1.45V

Minimum: 1.5 GHz @ 1.200 V
Stock: 1.83 GHz @ 1.3600 V


AMD Sempron 64 3000+ (754) stock - 1.4V

Minimum: 0.8 GHz @ 1.100 V (lowest possible, E6 stepping bug)
Stock: 1.8 GHz @ 1.150 V
OC: 2,3 GHz @ 1.400 V


AMD Athlon 64 3000+ - Clawhammer (754) stock - 1.5V

Minimum: 0.8 GHz @ 0.825 V
Stock: 2 GHz @ 1,375 V


AMD Athlon 64 3200+ - Newcastle (754) stock - 1.5V

Minimum:
Stock: 2.2 GHz @ 1.300 V


Turion ML-30 - Lancaster (754) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.6 GHz @ 0.925 V


AMD Athlon 64 3000+ - Winchester (939) stock - 1.4V

Stock: 1.8 GHz @ 1.104-1120 V


AMD Athlon 64 3200+ - Venice (939) stock - 1.35V

Minimum: 1.0 GHz @ 1.100 V (-> Vcore lock)
Stock: 2.0 GHz @ 1.125 V

Minimum: 1.0 GHz @ 1.100 V (-> Vcore lock)
Stock: 2.0 GHz @ 1.125 V
OC'ed: 2.25 GHz @ 1.275 V
OC'ed: 2.5 GHz @ 1.425 V


AMD Athlon 64 3500+ - Venice (939) stock - 1.35V

Minimum: 1.0 GHz @ 0.800 V
Stock: 2.2 GHz @ 1.175 V
OC'ed: 2.7 GHz @ 1.325 V


AMD Athlon X2 4600+ - Manchester (939) stock - 1.35V

Minimum: 1.0 GHz @ 1.100 V (Note: lowest possible VID)
Stock: 2.4 GHz @ 1.225 V


AMD Opteron 165 - Denmark (939) stock - 1.35V

Minimum: 1.1 GHz @ 0.825 V
Stock: 1.8 GHz @ 1.000 V
OC'ed: 2.5 GHz @ 1.250 V


AMD Opteron 170 - Denmark (939) stock - 1.35V

Stock: 2.0 GHz @ 1.100 V


AMD Opteron 185 - Denmark (939) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 2.6 GHz @ 1.200 V


AMD Athlon 64 3000+ - Winchester (AM2) stock - 1.4V

Minimum: 1.0 GHz @ 1,1 V
Stock: 1.8 GHz @ 1,175 V


AMD Athlon 64 3000+ - Orleans (AM2, Revision F2) stock - 1.4V

Minimum: 1.0 GHz @ 0.825 V
Stock: 1.8 GHz @ 1.100 V


AMD Sempron 64 3200+ - Manila (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.8 GHz @ 1.000 V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.8 GHz @ 0.900 V (not thoroughly tested)


AMD Sempron 64 3400+ (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.8 GHz @ 1.000 V


AMD Sempron LE-1100 - Sparta (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.9 GHz @ 0.950 V (12 hrs Orthos)

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.9 GHz @ 1.000 V


AMD Sempron LE-1250 - Sparta (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 2.2 GHz @ 0.975 V


AMD Athlon 64 3500+ - Orleans (AM2, Rev. F2) stock - 1.35V

Minimum: 1.0 GHz @ 0.900 V
Stock: 2.2 GHz @ 1.100 V


AMD Athlon 64 3500+ - Lima (AM2) stock - 1.35V

Minimum: 1.0 GHz @ 0.800 V
Stock: 2.2 GHz @ 1.025 V


AMD Athlon X2 3600+ - Windsor (AM2) stock - 1.25V?

Minimum: 1.0 GHz @ 0.900 V
Stock: 2.0 GHz @ 1.075 V


AMD Athlon X2 3600+ - Brisbane (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.800 V
Stock: 1.9 GHz @ 1.000 V

Minimum: 1.0 GHz @ 0.825 V
Stock: 1.9 GHz @ 1.000 V


AMD Athlon X2 3800+ - Windsor (AM2) stock - 1.35V

Minimum: 0.8 GHz @ 0.900 V
Stock: 2.0 GHz @ 1.125 V
OC'ed (sort of): 2.3 GHz @ 1.275 V

Minimum: 1 GHz @ 0.800 V
1.6 GHz (Crystal CPUID): 1.6 GHz @ 0.900 V
Stock: 2.0 GHz @ 0.975 V


AMD Athlon X2 4000+ - Brisbane (AM2) stock - 1.35V

Minimum: 1.0 GHz @ 0.856 V
Stock: 2.1 GHz @ 1.031 V

Minimum: 1.0 GHz @ 0.864 V
Stock: 2.1 GHz @ 1.056 V


AMD Athlon X2 4200+ - Windsor (AM2) stock - 1.25V

Minimum: 1.0 GHz @ 0.800 V
Stock: 2.2 GHz @ 1,125 V


AMD Athlon X2 4400+ - Brisbane (AM2, Rev. G2) stock - 1.3V

Minimum: 1.0 GHz @ 0.830 V
Stock: 2.3 GHz @ 1.010 V
OC'ed: 2.66 GHz @ 1.100 V
OC'ed: 3.00GHz @ 1.230 V

Stock: 2.3 GHz @ 0.960 V


AMD Athlon X2 4800+ - Brisbane (AM2) stock - 1.225V?

Minimum: 1.0 GHz @ 0.800 V
Stock: 2.5 GHz @ 1.200 V


AMD Athlon 64 X2 5400+ - Brisbane (AM2, Rev. G2) - stock 1.325V
Minimum Voltages
Minimum: 1.0 GHz @ 0.775 V
Stock: 2.8 GHz @ 1.225 V


AMD X2 BE-2350 (AM2) stock - 1.25V

Warning: system wasn't stable, need more input from others

Minimum: 1.0 GHz @ 0.825 V
Stock: 2.1 GHz @ 1.000 V


AMD X2 4450e (AM2) stock - 1.25V

Minimum: 1.0 GHz @ 0.850 V
Stock: 2.3 GHz @ 1.100 V


Intel Pentium III-S (Tualatin) 1.26 GHz

1.36 GHz (142 MHz FSB) @ 1.45 V (stock voltage not adjustable on my mobo, processor multi is locked)


Intel Pentium M Dothan 1.0 GHz

Minimum: 0.6 GHz @ 0.700 V (lowest possible)
Stock: 1.0 GHz @ 0.748 V


Intel Pentium M Banias 1.3 GHz

Minimum: 0.6 GHz @ 0.796 V (original 0.956v)
Stock: 1.3 GHz @ 1.180 V (original 1.340v)


Intel Pentium M Banias 1.4 GHz

Minimum: 0.6 GHz @ 0.700 V
Stock: 1.4 GHz @ 1.100 V (original 1.484v)


Intel Pentium M Dothan 1.5 GHz

Minimum: 0,6 GHz @ 0.700 V (original 0.988v)
Stock: 1,5 GHz @ 0.972 V (stable at 0.940, I add two VIDs for daily use, original 1.340v)


Intel Pentium M 735 Dothan 1.7 GHz

Minimum: 0.6 GHz @ 0.700 V (lowest possible, original 0.988v?)
Stock: 1.7 GHz @ 1.004 V


Intel Pentium M 745 Dothan 1.8 GHz

Minimum: 0.6 GHz @ 0.716 V
Midway: 1.4 GHz @ 0.908


Intel Pentium M 760 Dothan 2.0 GHz

Minimum: 0.800 GHz @ 0.700 V - Note: lowest possible VID
Stock: 2.0 GHz @ 1.068 V (stock 1.356v)


Intel C2D Mobile T2500 - Yonah (479) stock - ?

Minimum: 1.0 GHz @ 0.950 V
Stock: 2.0 GHz @ 1.100 V


Intel C2D Mobile T5600 - Merom (479) stock - 1.15V

Minimum (SpeedStep, 1GHz): 1.0 GHz @ 0.850 V (lowest possible)
Stock: 1.83 GHz @ 0.870 V

Stock: 1.86 GHz @ 0.950 V - lowest possible VID


Intel C2D Mobile T7400 - Merom (479) stock -

Minimum: 1.0 GHz @ 0.975 V (it's locked, won't go lower)
Stock: 2.16 GHz @ 1.04 V


Intel C2D E2140 - M0 (775) stock - 1.325V

Stock: 1.6 GHz @ 0.925 V
OC'ed: 2.8 GHz @ 1.325 V
OC'ed: 3.0 GHz @ 1.400 V
All value come from bios setting.

Minimum: 1.2 GHz @ 0.825 V
Stock: 1.6 GHz @ 0.887 V
OC'ed: 2.66 GHz @ 1.187 V


Intel C2D E2160 - M0 (775) stock - 1.325V

Minimum: 1.4GHz @ 0.850 V


Intel C2D E4300 - B2 (775) stock - 1.35V

Stock: 1.8 GHz @ 1.000 V (motherboard limited)
OC'ed: 2.4 GHz @ 1.2125 V
OC'ed: 2.7 GHz @ 1.325 V


Intel C2D E6600 - Conroe (775) stock - ?V

Minimum: 1.6 GHz @ 1.136 V (Note: lowest possible VID)
Stock: 2.4 GHz @ 1.136 V
OC'ed: 2.76 GHz @ 1.136V (notes: same voltage as with speedstep at this frequency!!)
OC'ed: 3.1 GHz @ 1.340V (notes: overclocked to maximum stock voltage)

Minimum: Haven't tried
Stock: 2.4 GHz @ 1.000 V
OC'ed: 3.0 GHz @ 1.175 V


Intel C2D E6750 - Conroe (775) stock - 1.35V

Minimum: 2.0 GHz @ 1.187 V
Stock: 2.66 GHz @ 1.187 V
OC'ed: 2.8 GHz @ 1.212 V
OC'ed: 3.2 GHz @ 1.325 V


Intel Core 2 Quad Q6600 - Kentsfield (Rev B3, Stepping 7) stock - ?

Minimum:
Stock: 2.4 GHz @ 1.31250 V (Temps 70.0/51.0; 1.6 GHz speedstep)
Stock Minimum: 2.4 GHz @ 1.16875 V (Temps 62.8/48; 1.6 GHz speedstep)


Intel Core 2 Quad Q6600 - Kentsfield (Rev G0, Stepping 7) stock - 1.35V

Minimum:
Stock: 2.4 GHz @ 1.0375 V

Minimum: 2.0 GHz (333x6) @ 1.000 V


Intel Core 2 Quad Q9450 - Yorkfield (Rev C1) stock - 1.225V?

Minimum:
Stock: 2.66 GHz @ 0.99375 V



If you have any suggestions to improve this thread, please tell me.
Last edited by Palindroman on Mon Apr 14, 2008 12:49 am, edited 24 times in total.

miahallen
Posts: 305
Joined: Thu Jan 18, 2007 10:31 pm
Location: Japan

Post by miahallen » Thu Jul 12, 2007 2:39 am

AMD Opteron 165 - Denmark (939) stock - 1.35V

low: 1.1GHz @ 0.825V
Stock: 1.8GHz @ 1.000V
OC'ed: 2.5GHz @ 1.250V

My sugesstion, as I listed, is to add successful OVERCLOCK & UNDERVOLT settings. As you can see, I would be my power expense would be 25% higher with the OC above, but my productivity would rise by an even larger amount - 38%. Therefore, while my power bill would be higher with the OC, my contribution to folding@home would outweigh the expense.

dragmor
Posts: 301
Joined: Sun Jul 10, 2005 7:54 pm
Location: Oz

Post by dragmor » Thu Jul 12, 2007 8:01 pm

AMD Athlon 64 3500+ - Venice (939) stock - 1.35V
Minimum: 1.0GHz @ 0.800V
Stock: 2.2GHz @ 1.175V
OC'ed: 2.7GHz @ 1.325V


Intel C2D E4300 - B2 (775) stock - 1.35V
Stock: 1.8GHz @ 1.000V (motherboard limited)
OC'ed: 2.4GHz @ 1.2125V
OC'ed: 2.7GHz @ 1.325V

Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Post by Palindroman » Fri Jul 13, 2007 7:19 am

Thanks for posting, miahallen and dragmor!
My sugesstion, as I listed, is to add successful OVERCLOCK & UNDERVOLT settings.
All data is interesting, so I'll be sure to add them.


ps I added stock voltages to some of the other CPUs

burebista
Posts: 402
Joined: Fri Sep 02, 2005 12:05 am
Location: Romania

Post by burebista » Fri Jul 13, 2007 8:48 am

AMD X2 3800+ Windsor (AM2) stock 1.35V
Minimum: 0.8GHz @ 0.900V
Stock: 2GHz @ 1.125V
OC'ed (sort of): 2.3GHz @1.275V

And for my curiosity I've tested it like in picture below, but it was unstable at FID/VID transitions with RMClock.

Image

peteamer
*Lifetime Patron*
Posts: 1740
Joined: Sun Dec 21, 2003 11:24 am
Location: 'Sunny' Cornwall U.K.

Post by peteamer » Fri Jul 13, 2007 10:19 am

Good shout Palindroman 8)

Perhaps drop it into the folding forum too.....


Pete

ryboto
Friend of SPCR
Posts: 1439
Joined: Tue Dec 14, 2004 4:06 pm
Location: New Hampshire, US
Contact:

Post by ryboto » Fri Jul 13, 2007 11:47 am

Opteron 170 CCBBE 0617 FMPW
Currently at 2.2ghz, 1.15v
Was at 2.0ghz, 1.1v

I have not tested the lowest I can undervolt given a low multiplier because the machine is constantly folding, and low clock speeds aren't my aim.

ryboto
Friend of SPCR
Posts: 1439
Joined: Tue Dec 14, 2004 4:06 pm
Location: New Hampshire, US
Contact:

Post by ryboto » Fri Jul 13, 2007 11:51 am

miahallen wrote:As you can see, I would be my power expense would be 25% higher with the OC above, but my productivity would rise by an even larger amount - 38%. Therefore, while my power bill would be higher with the OC, my contribution to folding@home would outweigh the expense.
this is the same mentality I've been using. I'm trying to find a balance between WU frame time and power consumption. But I'm also limited because I want to run my chip fanless, so I'm almost at the thermal limit, I really want to stay with a 2-fan system.

b3nbranch
*Lifetime Patron*
Posts: 130
Joined: Wed Aug 09, 2006 6:10 pm
Location: Columbus, Ohio
Contact:

Post by b3nbranch » Fri Jul 13, 2007 12:53 pm

Intel C2D Mobile (Merom) T7400

stock idle freq/volt: 1.0 GHz @ 0.975v
stock busy freq/volt: 2.16 GHz @ 1.21v

undervolt idle: 1.0 GHz @ 0.975v (it's locked, won't go lower)
undervolt busy: 2.16 GHz @ 1.04v

am not overclocking.

Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Post by Palindroman » Sat Jul 14, 2007 12:42 am

Thanks for the results, everyone!
b3nbranch wrote:Intel C2D Mobile (Merom) T7400

stock idle freq/volt: 1.0 GHz @ 0.975v
stock busy freq/volt: 2.16 GHz @ 1.21v

undervolt idle: 1.0 GHz @ 0.975v (it's locked, won't go lower)
undervolt busy: 2.16 GHz @ 1.04v

am not overclocking.
Is 0.975 the stock voltage for the T7400? Or is that with Speedstep enabled?

highlandsun
Posts: 139
Joined: Thu Nov 10, 2005 2:04 am
Location: Los Angeles, CA
Contact:

Post by highlandsun » Sat Jul 14, 2007 3:07 am

I've got my Opteron 185 running at 0.8V at 800MHz in its idle mode, and 1.2V @ 2.6GHz under full load. (Stock is 1.35V at full load, 1.1V @ 1GHz in idle.) It's rock solid at both of these extremes, but the 800MHz setting only works if you also reduce the HT speed to 800MHz (default is 1GHz) in the BIOS.

At stock voltage (1.35V) I've overclocked it to just over 3.0GHz. Much faster than that it gets unstable; I haven't tried raising the voltage to push it further.

jaldridge6
Posts: 319
Joined: Wed May 09, 2007 2:31 am
Location: Hell

Post by jaldridge6 » Sat Jul 14, 2007 4:35 am

i have an e6300 at 1.1v overclocked to 2400mhz [400x6].

miahallen
Posts: 305
Joined: Thu Jan 18, 2007 10:31 pm
Location: Japan

Post by miahallen » Sat Jul 14, 2007 8:41 am

jaldridge6 wrote:i have an e6300 at 1.1v overclocked to 2400mhz [400x6].
Nice, I like that :D

Lawrence Lee
SPCR Reviewer
Posts: 1115
Joined: Fri Mar 04, 2005 9:07 pm
Location: Vancouver

Post by Lawrence Lee » Sat Jul 14, 2007 9:28 am

AMD Opteron 165 - (S939) stock - 1.35V
2.5Ghz @ 1.350V
1.8Ghz @ 1.050V
1.1Ghz @ 0.900v

AMD Athlon X2 3600+ - Brisbane (AM2) stock - 1.35V
2.7Ghz @ 1.275V
2.0Ghz @ 1.025V
1.3Ghz @ 0.850V

AMD Athlon X2 3600+ - Brisbane (AM2) stock - 1.35V
2.4Ghz @ 1.275V
1.9Ghz @ 1.000V
1.3Ghz @ 0.900V
1.0Ghz @ 0.800V

jaganath
Posts: 5085
Joined: Tue Sep 20, 2005 6:55 am
Location: UK

Post by jaganath » Sat Jul 14, 2007 10:11 am

1.3Ghz @ 0.850V
just curious, is it able to be cooled passively at these settings? (ie no CPU fan)

b3nbranch
*Lifetime Patron*
Posts: 130
Joined: Wed Aug 09, 2006 6:10 pm
Location: Columbus, Ohio
Contact:

Post by b3nbranch » Sat Jul 14, 2007 11:07 am

Palindroman wrote:Thanks for the results, everyone!
Is 0.975 the stock voltage for the T7400? Or is that with Speedstep enabled?
Well, speedstep has been abled since the first boot, so I'm sure
that's what the 0.975 thing is. I'm sure it could go lower than that
at 1.0 GHz, but it's locked in the sense that the CPU ignores requests
for a VID less than that.

miahallen
Posts: 305
Joined: Thu Jan 18, 2007 10:31 pm
Location: Japan

Post by miahallen » Sat Jul 14, 2007 1:00 pm

jaganath wrote:
1.3Ghz @ 0.850V
just curious, is it able to be cooled passively at these settings? (ie no CPU fan)
Sure, but probably not with the stock cooler. any good Aftermarket cooler should do it no problem as long a your case had a little bit of airflow.

cmthomson
Posts: 1266
Joined: Sun Oct 09, 2005 8:35 am
Location: Pleasanton, CA

Post by cmthomson » Sat Jul 14, 2007 8:17 pm

All Core2 processors are designed to run at 1.05V while idling (ie, with SpeedStep enabled), and almost all of them will operate at load at close to this voltage if kept cool. Some will operate at load at lower voltages, but not much lower...

aaa
Posts: 167
Joined: Tue Jul 11, 2006 7:23 pm

Post by aaa » Sun Jul 15, 2007 7:01 am

Interesting results I've seen:

Pentium M Dothan - 1.3v?
1.5ghz @ 0.908v
1ghz @ 0.716v
600mhz @ 0.7v

Turion ML-30 - 1.35v
1.6ghz @ 0.925v
800mhz @ 0.8v

Athlon64 x2 4000+ Windsor AM2 - 1.35v
2.7ghz @ 1.35v
2.0ghz @ 1.1v
Haven't tried lower than 1.35ghz/1.1v because the fan turns off already, don't see a point.

kaange
Posts: 275
Joined: Thu Dec 21, 2006 6:58 pm
Location: Melbourne, Australia

Post by kaange » Mon Jul 16, 2007 4:57 pm

Intel E4300 with Gigabyte P965-DS3 m/b Stock voltage - 1.325V
Stock clocking 1.8GHz
Won't post under 0.925V
Won't boot into XP under 0.96875V but random reboots at this voltage.
Stable for > 10 hours Orthos testing at 0.98725V

loimlo
Posts: 762
Joined: Thu May 03, 2007 3:58 am
Location: Formosa

Post by loimlo » Mon Jul 16, 2007 6:56 pm

AMD Athlon X2 3800+ 35W - Windsor AM2 stock - 1.075V
1.3G @ 0.85V
2.3G @ 1.1V

No trial of extremely undervolt yet.

jackylman
Posts: 784
Joined: Sun May 22, 2005 8:13 am
Location: Pennsylvania, USA

Post by jackylman » Mon Jul 16, 2007 7:20 pm

AMD Athlon 64 3500+ - Orleans (AM2)

Minimum: 1.0GHz @ .925V
Stock: 2.2GHz @ 1.150V

Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Post by Palindroman » Tue Jul 17, 2007 12:47 am

I've updated the results, but please post only the minimum voltages at which your system is stable. It's the extremes we want to know here.
AMD Athlon 64 3500+ - Orleans (AM2)

Minimum: 1.0GHz @ .925V
Stock: 2.2GHz @ 1.150V
What is the stock voltage of this one, do you know? There Orleans-core Athlons with different power envelopes, I believe.

fri2219
Posts: 222
Joined: Mon Feb 05, 2007 4:14 pm
Location: Forkbomb, New South Wales

Post by fri2219 » Tue Jul 17, 2007 10:01 am

I'm using ASUS BIOS to run a Brisbane 4800+ at 1.1V. (Hasn't been stable at lower voltages).

Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Post by Palindroman » Tue Jul 17, 2007 10:39 am

fri2219 wrote:I'm using ASUS BIOS to run a Brisbane 4800+ at 1.1V. (Hasn't been stable at lower voltages).
Maybe you should try your hand at undervolting through RMClock (depending on your OS of course)?

ryboto
Friend of SPCR
Posts: 1439
Joined: Tue Dec 14, 2004 4:06 pm
Location: New Hampshire, US
Contact:

Post by ryboto » Tue Jul 17, 2007 10:42 am

I guess I'll repost mine, though, I haven't tried for low multi+min voltage

Opteron 170 Denmark (939) - Stock 1.35V
Min Stock(2.0ghz) 1.1v
2.2ghz 1.15v(so far)

jojo4u
Posts: 806
Joined: Sat Dec 14, 2002 7:00 am
Location: Germany

Post by jojo4u » Tue Jul 17, 2007 10:50 am

Merom T5600 Stock 1.15V
min stock (1.86 GHz) 0.95 V - lowest possible VID

Palindroman
Posts: 247
Joined: Fri Oct 20, 2006 1:00 am

Post by Palindroman » Wed Jul 18, 2007 1:27 am

Thanks, I've added your results.

If I may ask, how come the Meroms don't go below a 0.950v (T5600) and 0.975 (T7400) respectively. According to this site it should be able to vary between 0.75~1.3V.

jaldridge6
Posts: 319
Joined: Wed May 09, 2007 2:31 am
Location: Hell

Post by jaldridge6 » Wed Jul 18, 2007 2:57 am

e6300@ 1.125v 2.4ghz, 400x6, 1600mhz FSB......... stable as stable can be.

soujir0u
Posts: 86
Joined: Thu Jul 22, 2004 3:32 am

Post by soujir0u » Wed Jul 18, 2007 3:04 am

C2D E6300 @ 2.8GHz (400 x 7) 1.1625v

48 hours Orthos stable.

Post Reply