Hi
i have an intel d2700dc board,
it has a PCMCIA port onboard,
you can see it here :
http://www.cartft.com/catalog/il/1410
it has a rectangle drawing on the board and some pins to connect it to the board,
my question is, what can i do with it ?
can a normal PCMCIA card connect to there ?
thanks
intel d2700dc
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Re: intel d2700dc
I'm not aware there's a PCMCIA header on this board.
I'm not sure what you're talking about. The miniPCIe connector maybe? http://en.wikipedia.org/wiki/PCI_Expres ... _Mini_Card
If you really needed to use a PCMCIA card I guess you could use a PCMCIA controller card. But in most cases, you'd be better off getting a different device to perform the same function.
Could you post the idle and load temperatures you're getting with this board by the way?
I'm not sure what you're talking about. The miniPCIe connector maybe? http://en.wikipedia.org/wiki/PCI_Expres ... _Mini_Card
If you really needed to use a PCMCIA card I guess you could use a PCMCIA controller card. But in most cases, you'd be better off getting a different device to perform the same function.
Could you post the idle and load temperatures you're getting with this board by the way?
Re: intel d2700dc
my mistake,
it is a "PCI Express Full-/Half-Mini Card slot"
http://www.intel.com/support/motherboar ... 032653.htm
but i cant see what card can fit there,
i just got the board, i will have it assembled in a weak so i will have more details.
thanks
it is a "PCI Express Full-/Half-Mini Card slot"
http://www.intel.com/support/motherboar ... 032653.htm
but i cant see what card can fit there,
i just got the board, i will have it assembled in a weak so i will have more details.
thanks
Re: intel d2700dc
Check the wikipedia link that HFat posted and you could also have a look at this page, for instance, to see some examples of various MiniPCIe cards.drorgon wrote:but i cant see what card can fit there,
Re: intel d2700dc
i had a little problem ( i didn't have a usb keyboard ) so i cant yet test the board on load,HFat wrote: Could you post the idle and load temperatures you're getting with this board by the way?
But i plugged it in with a usb mouse a DVI display and a WI PicoPsu,
i measured a 0.165 A current with my FLUKE from the wall ( 230VAC )
which is ~ 38W this is on idle without an operating system and just the "no operating system present" on the start-up
the rest of the results will be in a week.