I've had my Biostar TA790GXBE on the bench for a while but got round to ziptie-ing the fan to it yesterday and put it in the case but now it doesn't power up. When I switch the PSU on I see the board LEDs flicker on briefly, which is what they've always done so obviously power is getting to the board, in part at least.
The thing is, the board has power/reset buttons built onto it and the power one stopped working some time ago but as I could still power it with the switch attached to the front panel header block I wasn't too bothered. So perhaps there's a problem in that area that's spread to the header block as well now? Could it be a dry joint? I guess I could try and fix it myself if so, but if I'm lilkely to send it back for repair I can't mess with it at all.
It's a real pain because I was planning to send this PC to my brother for his birthday in 3-4 weeks. He's got the box for the motherboard, so if I have to send it for repair (I'm not sure it's still under warranty) I'll have to get him to post that to me before I can send it off and then who knows how long it will be before I get it back. I thought I could buy another motherboard if it's possible to get one that's more or less the same (i.e. 790GX chipset) so that I won't have to reinstall Windows 7 x86 from scratch and then sell the repaired Biostar board when I get it back
Main: CM HAF XB EVO case, MSI 990FXA-GD80, Phenom II X4 955 @3.5Ghz (TRUE Rev. C/Nexus), HD6950 2GB (with AXPII), 16GB Corsair Dominator LP DDR3 1066Mhz, Samsung F4EG, WD 2TB, 256GB SSD, Antec CP-850
2nd PC: Bach VX, GA-MA780G-UD3H, PhII 720BE @ 3.2Ghz (SI-128SE/Yate Loon fan), 8GB Kingston Hyper-X DDR2 1066MHz, Yate Loon 140mm intake, Nexus 120mm exhaust, HD103UJ, WD6400AAKS, Nexus Value 430W